The 8 Best Tesla Jacobs Ladder

Features:
1. 12-36VDC input (recommend 24V), output high voltage direct current, voltage of the input voltage of about 1000 times. The 12V input can reach 50-100W power, 24 V input max can reach more than 200W, so request power supply current best in more than 10A.
2. A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them “ZVS circuit”. Because of its big power, low heat, simple and reliable by fans are widely used in the drive spark gap tesla coil (SGTC) and Jacob, ladders, Marx generator, etc.

Package included:
1 x ZVS Tesla coil driver board
1 x ignition coil

Features:

1. 12-36VDC input (recommend 24V), output high voltage direct current, voltage of the input voltage of about 1000 times.The 12V input can reach 50-100W power, 24 V input max can reach more than 200W, so request power supply current best in more than 10A.
2. A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them “ZVS circuit”. Because of its big power, low heat, simple and reliable by fans are widely used in the drive spark gap tesla coil (SGTC) and Jacob, ladders, Marx generator, etc.

Package included:

1  x  ZVS Tesla coil driver board
1  x  ignition coil

Features:

&nbsp&nbsp&nbsp● 12-36VDC input (recommend 24V 10A), output high voltage direct current, voltage of the input voltage of about 1000 times. The 12V input can reach 50-100W power, 24 V input max can reach more than 200W.
&nbsp&nbsp&nbsp● ZVS circuit. High output power, low heat, simply and reliable, has been widely used in the drive spark gap tesla coil (SGTC) and Jacob, ladders, Marx generator, etc.

Notice:

You will need to source it at least 10 A at input current for safety concern.

Package List:

&nbsp&nbsp&nbsp● 1 x SainSmart ZVS Tesla coil driver board
&nbsp&nbsp&nbsp● 1 x ignition coil

Manual:

https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-019-173/ZVS+manual+.docx

HOPE DONGKER MAKES YOUR LIFE EASIER!

Product Introduction:
1.Max Power:150W (when driving 15V induction heat);if drive 12V ignition coil,primary 5+5 turns,it will be 30W
2.Input Voltage:DC 5-15V (this voltage range is operating voltage,not for power no-load voltage)
3.When using battery or storage battery for power supply,please make sure that the operating voltage is more than 4.5V
4.Power wire should not be reversely connected,and power on after connecting with the load
5.PCB Size:55mm*37mm*1.6mm
6.When heating the coil,the width of heated object should be in the range of 1/3-1/2 of heating coil internal diameter;please don’t be over 2/3;the diameter of heating object should be  within 20mm.When inductive heating,there should be a power off for cooling after operating for 5 minutes;please solder the heating coil on the PCB board when heating
7.Blue LED power indicator lamp (If the indicator lamp is not on,there may be some reasons:1.the connection is false,and the power is not power on 2.there is component damage)When the indicator lamp is very dim,maybe because of insufficient power,please change the power supply with greater power.

Description:

Note: the product is for ZVS heating power supply module, does not include the heating coil

1, this no tap mini plate for ZVS finished board, with no heating coil, ignition coil and a cooling fan, etc

2, the input voltage DC 5 v to 12 v

3, maximum power 120 w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.

4, PCB size: 55 mm * 37 mm * 1.6 mm

5, heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds.

6, induction heating, power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt!!!! Therefore, induction heating the best heating coil directly welded to the PCB. This buyer, please note

Package Include:

1 x5 v ~ 12 v for ZVS induction heating power supply module tesla Jacob’s ladder

Description:
Note: the product is ZVS heating power supply module, include the heating coil.

This no tap mini plate ZVS finished board,with no ignition coil and a cooling fan, etc.
Input voltage DC 5 v to 12 v.
Maximum power 120 w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.
4, PCB size: 55 mm * 37 mm * 1.6 mm.
5, heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don’t more than two-thirds.
6, induction heating, power work five minutes to cool. For induction heating current is larger, heating coil is relatively large. When heated, part of the heat generated by the heated object will be passed on to the heating coil, over time, the temperature of the heating coil will be high. If the heating coil in the words of the terminal, the terminal part of plastic melt!!!! Therefore, induction heating the best heating coil directly welded to the PCB.

package include:
1 x ZVS heating power supply module
1 x heating coil

Specifications:
Input Voltage Output Voltage Maximum Power
12V approx 10000V 100W
24V approx 20000V 200W
Features:
The ZVS driver circuit elements are made of high quality, high reliability, strong power.
Input 12-24V DC (Recommended 24V), you can use the switching power supply, lead-acid batteries or lithium battery-powered, can also be used by the rectifier transformer power supply filter, filter capacitor is not less than 10000uF.
Output high voltage DC input voltage is approximately 800 times the voltage.
12V input to be 50-100W power, 24V input arc can be up to 200W or more, it requires power supply current is preferably at least 10A.
Common debugger questions:
1. Driver board does not work
Please check if power supply voltage/current is sufficient. Normally recommend use 12V+, 5A+ power supply.
2. Excessive heat generated at magnetic coil
When using transformer as power supply, filter capacitor should have sufficient capacity, otherwise voltage will not be stable, then coil inductor will shoulder great voltage fluctuation and gives out excessive heat. Recommend to use 10000uf+ filter capacitor.
Package includes:
1 x ZVS Tesla coil flyback driver generator

• Specification:
  Input voltage: 5v-12v
  Module dimensions:5.5*4*2 cm(L*W*H)
  Product Weight: 119g
  Coil size: length:7.5cm
  width: 2.8cm

   

• Features:
  ZVS heating power supply module including heating coil
  Input voltage DC5V-12V(We are not guarantee the module will work when the voltage is over 12V or less than 5V)
  Maximum power 120W(when 12V eddy-current heating)
  Ensure all the components welding right,power line connect in right way,than to set up an electric circuit.
  The width of the heated object is as far as possible between the 1/3~1/2 of the inner diameter of the heating coil, the maximum not more than 2/3!

• Package includes:

1PCS 5~12 v ZVS Induction Heating Power Supply Module Tesla Jacob’s Ladder + Coil CA 

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy tesla jacobs ladder, eg:

• What are Top 10 tesla jacobs ladder for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 tesla jacobs ladder to buy?
• What are Top Rated tesla jacobs ladder to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) tesla jacobs ladder?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for tesla jacobs ladder.
• Before deciding to buy any tesla jacobs ladder, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose tesla jacobs ladder and What you should consider when buying the tesla jacobs ladder and Where to Buy or Purchase the tesla jacobs ladder. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 tesla jacobs ladder of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about tesla jacobs ladder.

Conclusion

By our suggestions above, we hope that you can found tesla jacobs ladder for you.Please don’t forget to share your experience by comment in this post. Thank you!