Best Parallel Cooling Fan
Nowadays, there are so many products of parallel cooling fan in the market and you are wondering to choose a best one. You have searched for parallel cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings parallel cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Similar items with 4 stars and above
ShareGoo 4PCS JST Plug Splitter,JST Male Female Y Cable,JST Y Parallel Adapter Splitter Harness for Traxxas TRX-4 1/10 RC Car Crawler ESC Battery Motor Cooling Fan,15CM/5.9"
- Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are special for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car.
- The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch.
- The Female to Female Y Harness are used for TRX-4 ESC,it alows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time.
- Also can be used on most mini RC helicopter and indoor 3D plane,great for small Lipo and NiMh connection.
- Cable length:15CM/5.9″
Note:Use what Y harness depends on which is the power source,the TRX-4 ESC or receiver.
The length of these cables are 15CM/5.9″,so please measure the distance between parts before you place the order.
Special used for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car.
If you want run lights, winch,motor cooling fan at the same time.Use the Male to Female Y Harness,it can be powered by receiver;Use the Female to Female Y Harness,it can be powered by TRX-4 ESC,other ESC with JST plug.
Functional Y cable and convenient to use
Cable length: 15cm
Color: Black & Red
1 Male to 2 Female Y Splitter Cable x 1
1 Male to 3 Female Y Splitter Cable x 1
1 Female to 2 Female Y Splitter Cable x 1
1 Female to 3 Female Y Splitter Cable x 1
anidees Graphic Card Cooler 3 x80mm PWM Fan, Support ASUS Aura SYNC/MSI Mystic Sync/ASROCK Aura RGB/GIGABYTE RGB Fusion (5V 3 Pin Addressable headers ONLY) PCI Mount Bracket with Remote- AI-GP-CL
- Parallel or Vertical Cooling down Graphic card directly with three high air flow RGB Fans
- Sturdy Metal with aluminum brush with PCI mount design for easy installation
- 80mm Dual Ring RGB Fans x3 pcs: 12 independent RGB LEDs in every fan, split between two separate light loops, Rainbow and static colors.
- Easy to use: the fan allows you to control the fan speed and LED mode by remote control, or connect to the motherboard, control the fan speed by PWM and light by 5V 3pin ASUS Aura Sync, MSI Mystic Light Sync (J-Rainbow) and GIGABYTE RGB Fusion 2.0 (Please note: It does not support 12V 4 pin RGB header from motherboard).
- PWM fan speed control: allows for dynamic speed adjustment, minimizing noise or maximizing airflow.
- RF wireless control: allow you to adjust Fan Speed and cycle through lighting effects / brightness / LED speed without opening the case.
Part No : AI-GP-CL
LED Color : RGB
Dimension:11.22 x 3.7 x 1.02 inches
Fan Dimension : 80 x 80 x 20 mm
Weigh : 1 lb
Max Air Flow : 11.14 CFM
Max Air Pressure: 0.49 mm-H2O
Fan Speed: 1600 rpm ± 10% RPM
Noisy Leve : 19.3 dBA
Bearing : Rifle Bearing
Connector : 5 PIN
Voltage :12 V
Start Voltage : 8.5V
Power consumption : 3.12W
Buy with confidence: 12 Months Warranty, 24 hours friendly customer service available at all time.
TeamProfitcom 4 Pin PWM Fan Extension Cable PC Fan Power Braided Sleeved Extending Fan Cable Extension Cable Adapter Case 4-Pin Cooling Fans Cable (8 Pack)
- Pacakge Content: 8 pcs 4 Pin Fan Extension Cable.
- 4Pin Male To Female fan extension cable offers greater flexibility to position motherboard and CPU Fans for optimal coolin
- Package: 8 pcs PWM Fan Extnesion Cable 4 Pin fan extension cable Compatible with ONLY 4pin PMW fan connector for your PC(as shown in the product photos 4,5)
- The length of the product (Approx): 12 inches, Color: Black Braided Sleeved
Specification: Product Name: Black Sleeved PWM fan Extension Cable Connector Type: 4 pin Length: 12 inches Function: help protect your PC from overheating. The cable is one 4-pin female connector to 4-pin male connector, suits for CPU and PC case fan. Package: 8 pcs PWM Fan Extnesion Cable 4 Pin fan extension cable Compatible with ONLY 4pin PMW fan connector for your PC
Vktech 5Pcs Black Brushless DC Cooling Blower Fan 5015S 5V 0.1-0.3A 50x15mm
Quiet sleeve-bearing design
Ultra quiet MID speed brushless DC Blower
Blade Material is thermoplastic UL94V-0 PBT
Housing Material is thermoplastic UL PBT
Operating Temperature: -10 Celsius degree to +60 Celsius degree
Life Expectancy at 40 Celsius degree: 40000 hours
Rating: DC 5V / 0.1-0.3A
Size: Approx. 50 x 15mm (D*H)
5 x Blower
TPI Corporation CE12-DS Direct Drive Exhaust Fan, Shutter Mounted, Single Phase, 12" Diameter, 120 Volt
- Shutter mounted 3-speed exhaust fan for use in exterior ventilation
- 1.1 amp, 120 volt, single phase, 1/12 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor
- Self-closing shutters protect the fan from rain when not in operation
- Three aluminum paddle blades attached to a steel hub and spider assembly for durability
- Junction box included for direct wiring to wall switch
This TPI Corporation CE 12-DS single phase 12-inch diameter direct drive exhaust fan has a built-in shutter mechanism and is suitable for ventilating a building to the outside. The blade assembly (consisting of a steel hub and spider) holds the fan head’s three aluminum paddles, which are enclosed by front steel spiral wire guards for strength. The built-in shutter mechanism allows the fan to be installed without external framing, and the self-closing shutters protect the fan from rain and snow when not in operation. The permanent split capacitor (PSC) motor provides both starting torque and the ability to run at variable speeds. The motor of the TPI direct drive exhaust fan is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.
|Motor||3-speed, 1.1 amp, 120 volt, single phase, 1/12 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor|
|Switch type||Pull chain|
|Cord||No cord, junction box provided for direct wiring|
|Blade guards||Steel spiral wire|
|Cubic feet per minute (CFM)||825 / 710 / 560|
|Dimensions||15.125 x 15.125 x 13.305 inches (H x W x D)|
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Industrial fans are used in workplace environments to exhaust fumes or direct air flow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes. They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of air flow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large blade fan. Industrial fans are used in warehouses, gyms, and other commercial environments to ventilate spaces and to circulate air.
TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.
RuiLing 2-Pack 12cm Metal Fan Protective Cover for 3D Printer Accessories,PC Computer Case Laptop Cooling Fan Safety Grill Protector with M4 Screw Fasteners
- Packing:2pcs Fan Metal Grill Protector, Size: 12cm, Parallel Hole Pitch: 105mm, Diagonal Hole Pitch: 150mm.
- Made of high quality metal material, electroplated surface,rustproof, corrosion resistance, long service life.
- Hollow Out Design, fully cover the fan well without affecting the cooling effect.
- Perfect tools for protecting fans’ blade blocking, wires and other electronic accessories from damaging caused by fan blade’s rotation.
- 4 screw mounting holes, come with M4x8mm screw fasteners, can be easily install on the fan.
Type: Fan Metal Grill Protector
Parallel Hole Pitch: 105mm
Diagonal Hole Pitch: 150mm
Material: Electroplated Iron
Mounting Screw Size: M4x8mm
Function: Avoid fans’ blade blocked and fingers or other parts touching rotating blades
Made of high quality metal material, electroplated surface, rustproof, corrosion resistance,long service life.
Hollow Out Design, fully cover the fan well without affecting the cooling effect.
Ideal tools for protecting finger from hurt, fans, wires and other electronic accessories from damaging caused by fan blade’s rotation.
4 screw mounting holes, come with screw fasteners, can be easily installed on the fan.
2x Metal Fan Protective Cover
DEEPCOOL FRYZEN Air CPU Cooler for AMD TR4/AM4, Addressable RGB for Top Cover and Fan Frame with Motherboard SYNC Control, 6 Heatpipes, Premium All-Aluminum Fan Frame with Inverse Double-bladed Fan
- Supports AMD TR4/AM4 and mainstream AMD Socket quick installation
- Addressable RGB function with sync-control for motherboard lighting is supported
- Parallel arrangement of 6 boot-shaped heatpipes provides faster heat dissipation
- Exclusive metal fan frame with inverse double-bladed fans
- Premium all-aluminum fan frame add a quality finish with the high grade texture of the finest materials
MAA-KU DC Axial Case Cooling Fan. Size : 1.97" inches (5x5x2cm), (50x50x20mm), Supply Voltage : 24VDC, Material : Plastic P.B.T, Color : Black.
- Outer frame size :- L=50 mm x W=50 mm x H=20 mm
- Supply voltage :- 24 Volt DC / Speed :- 5000 RPM / Air volume :- 15 CFM
- Power :- 1.2 watts / Noise level :- 22 db / Current :- 0.05 ampere
- Power Connection :- 2-pin
- 1 YEAR WARRANTY (warranty type – product free shipping on your address with in warranty period)
DC AXIAL COOLING FAN are fans blow air along the axis of the fan, or parallel to the track of the blade axis. DC axial fans are found in a variety of applications, including computing, servers, telecommunication cabinets, and any type of equipment where the need for thermal control is necessary for the improved reliability and life extension of the components that are included in the system. Uncontrolled heat generated by electronic devices will not only decrease the performance of any system, but will ultimately lead to complete system failure. In order to prevent this catastrophe from occurring, it is imperative that your equipment be designed with an efficient cooling system in mind. This system will not only be crucial to heat dissipation but will also contribute to the stability and long life of the equipment itself. This is where a DC fan with a well designed cooling path becomes one of the most important components of any equipment. Heat dissipation for the prevention of premature failure is by far the most crucial part of any electronic system design, and a DC fan is one of the best tools available to keep your electronic devices performing at top operational shape. DC fan functions best under a low pressure or low system impedance environment. With reduced fan speed the noise produced by an axial fan can be kept at a minimum. Because of this low level of audible noise, as well as their economical price range, this kind of fan is extensively used in PCs, for both CPU and power supply cooling.
Mishimoto MMFS-E36-92P BMW E36 Performance Fan Shroud Kit, 1992-1999, Silver
Keep your BMW E36 cool with the Mishimoto Performance Fan Shroud Kit! This unique electric fan shroud setup completely eliminates the stock, failure-prone mechanical fan. The fan shroud mounts directly to the stock radiator, Mishimoto Performance Aluminum Radiator and Mishimoto X-Line Performance Aluminum Radiator and includes a 16″ high-flow electric fan that produces over 1850 cfm of airflow. Optionally, this kit can include a Mishimoto Adjustable Fan Controller Kit, which will provide the user with total control over coolant temperatures. The Mishimoto BMW E36 Fan Shroud Kit includes all hardware required for installation and is compatible with the stock expansion tank. This fan shroud has a Stealth Black finish that provides a subtle accent for your engine bay. As with all our products, this fan shroud kit includes the Mishimoto Lifetime Warranty you know and trust.
By our suggestions above, we hope that you can found parallel cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
Best parallel cooling fan: Top-Rated Brands & What to Buy