The 7 Best Hose Fitting Water Cooling Cpu

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 255 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 210 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Alphacool “Eisfluegel”: The flow indicator with added value! Water cooling in a computer always serves as a visual upgrade. Neatly arranged hosing or HardTubes make for an impressive sight. With the Alphacool “Eisfluegel”, you can add in an extra eye-catcher. The silent revolution of the fan wheel will always show the direction of the flow. The combination of acetal and plexiglass is a winning combination which fits seamlessly into any system. Besides the two ¼” screw threads necessary for the water flow, Alphacool “Eisfluegel” also has another screw thread on the upper side which can be used for many purposes: illumination, fill port, drain port, or as an angled piece – functionality is still guaranteed even if the upper thread is used as an outlet. The fan with six blades inside is also made of plexiglass and the outer sides are marked in two different colours, blue and yellow. The side with the greater contrast can be chosen depending on the colour of the fluid. Technical Specifications Materials: acetal, plexiglass, nylon Colours: black, transparent, yellow, blue Dimensions (LxWxH): 44.5 x 32.1 x 48.4 mm Screw threads: 3x G1/4” Scope of Delivery 1x Alphacool “Eisfluegel” 1x G1/4” screw plug

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 160 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

The PH-C350I is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, acrylic top and sandblasted cover plates for an elegant look.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Alphacool Eiszapfen Temperature Sensor A sensor that simply screws into a G1/4” thread. Comes with cable and 2-pin connection. Can be attached to any free G1/4” thread opening on a radiator, reservoir, or t-piece integrated into the loop. Fully sealed and absolutely watertight. Fully galvanized – no corrosion issues! Full functionality with any PC temperature indicator compatible with standard PC temperature indicators! Control your PC independent of the BIOS sensors: that’s a double safeguard, like the familiar “redundancy” (double security) in the professional sector. Long (50cm) connector cable, suitable even for a Big Tower! Scope of Delivery: 1x Alphacool Eiszapfen temperature sensor plug G1/4 – chrome This is a 10 kOhm temperature sensor which is compatible with, among others, the following devices: Aquaero 3.07, aquaero 4.00 Aquastream XT Ultra Aquaduct variants with external sensor input (360 XT, 720 XT) Alphacool Heatmaster Innovatek Fan-O-Matic Lian Li Multipanel Scythe Kaze T-Balancer Sensor input on many motherboards

Conclusion

By our suggestions above, we hope that you can found hose fitting water cooling cpu for you.Please don’t forget to share your experience by comment in this post. Thank you!