kinsunny 
Nowadays, there are so many products of asus tinker board cooling case in the market and you are wondering to choose a best one. You have searched for asus tinker board cooling case in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings asus tinker board cooling case which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Raspberry Pi 3 B+ Case with Fan Cooling and 3× Heat-Sinks, 5V 2.5A Power Supply with On/Off Switch Cable for RPi 3 B+, 3B, 2b
- 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 / pi 2 (Not include Pi Board)
- Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components
- Made of Acrylic, the pi case makes sure that won’t block Pi’s Wifi / Bluetooth signal
- Accurate plugs on the case are available to connect Pi’s GPIO, HDMI, USB, SD, Power Supply etc ports
- Specially Come with mini fan and 3 pcs heatsinks for quick cooling CPU/ROM/RAM, also has a stable 2.5A power supply with a handy on/off switch on the 1.5m long cable
(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .
Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.
Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case
Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)
Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.
(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.
Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A
Similar items with 4 stars and above
Eleduino Raspberry Pi 3, 2 and B+ Case Aluminum with Fan (Black)
- Aluminum case ,Customize for Raspberry Pi 3/Raspberry Pi 2/ Raspberry Pi B+
- High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation
- Good ventilation,easy carrying Simply Clicks Together Enclosure,good heat dissipation
- Smart design，not block the wifi/BT signals
- Access to all Raspberry Pi 3 /Raspberry Pi 2 / Raspberry Pi B+ consumer ports and GSI, camera and GPIO connectors
Rpi3 Alu Case with fan*1
Zebra Black Ice Case with Fan for ASUS Tinker Board and Tinker Board S ~ C4Labs
Our Black Ice enclosure frames the ASUS Tinker Board’s elegance, while keeping it safe and leaving access to the GPIO pins. The board is firmly locked into the middle of the case so it won’t float around. This makes it easy to transport without fear of damage. Now add the cooling ability of a fan, sleekly inlaid into the top. Air vents allow cool air to flow over the surface of the board, and exit through the top of the case.
C4Labs prides itself on quality cases and Customer Service!
LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)
- ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC.
- INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market.
- QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection.
- TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor).
- TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results.
Supported Single Board Computers:
- Raspberry Pi 3 Model B+
- Raspberry Pi 3 Model B
- Raspberry Pi 2 Model B
- Raspberry Pi Model B+
- Libre Computer Board AMl-S905X-CC
- Libre Computer Board ALL-H3-CC
- Libre Computer Board ROC-RK3328-CC
- ASUS Tinker Board S
- ASUS Tinker Board
- ODROID-C2***
- ODROID-C1+***
***MicroUSB Power Only, DC Jack not supported. MicroSD card inaccessible due to different positioning.
ASUS SBC Tinker board RK3288 SoC 1.8GHz Quad Core CPU, 600MHz Mali-T764 GPU, 2GB
- High performance QuadCore ARM SOC 1.8GHz with 2GB of RAM -The Tinker board features the Rockchip RK3288 Soc with Mali – T764 GPU and 2GB of Dual Channel DDR3 memory
- Non shared GBit LAN, Shielded Wi-Fi with upgradable antenna support – Tinker board features a high speed non shared GBit LAN port for improved performance along with integrated shielded Wi-Fi for robust IOT & network connectivity
- Highly compatible PCB & Topology –Leveraging industry standard PCB & topology dimensions along with IO and connection placement, Tinker board offer extensive compatibility with SBC accessories & chassis.
- HD Audio & HD & UHD Video Support – Tinker board supports HD audio 192/24bit audio along with accelerated HD & UHD ( 4K ) video playback support* requires use of Rockchip video player in TinkerOS
- DIY Friendly Design – Tinkerboard features multiple DIY friendly use features including a color coded GPIO header, silkscreen PCB and color coded pull tabs
The Tinker board is a single board computer designed for SBC hobbyists, makers & IOT enthusiasts. It features a quad core 1.8GHz SoC with 2GB RAM, non shared Gbit LAN, Wi-Fi with upgradable ipex antenna support & color coded GPIO connectivity. The PCB & topology leverages industry standard dimensions allowing for extensive compatibility with a wide range of accessories & chassis,
Tekit Tinker Board Case Aluminum with Cooling Fan Blue for ASUS SBC,Case for Tinker Board,Tinker Board Aluminum Alloy case,Tinker Board Case Aluminum with Fan (Black with Fan)
- High quality Tinker board aluminum alloy case with Cooling fan,Tinker board Case Aluminum With fan
- Works for ASUS SBC Tinker board Made out of high quality Aluminum material
- High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation
- Smart design,not block the wifi/BT signals Come with Mini cooling fan, Robber feet and
- Come with Mini cooling fan, Robber feet and Screwdriver,Convenient to use
Works for ASUS SBC Tinker board Made out of high quality Aluminum material High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation Smart design,not block the wifi/BT signals Come with Mini cooling fan, Robber feet and Screwdriver,Convenient to use Package List: Tinker board Alu case*1 Cooling fan*1 Screwdriver*1
Tekit Tinker Board Case Aluminum with Cooling Fan Blue for ASUS SBC,Case for Tinker Board,Tinker Board Aluminum Alloy case,Tinker Board Case Aluminum with Fan (Black)
- High quality Tinker board aluminum alloy case with Cooling fan,Tinker board Case Aluminum With fan
- Works for ASUS SBC Tinker board Made out of high quality Aluminum material
- High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation
- Smart design,not block the wifi/BT signals Come with Mini cooling fan, Robber feet and
- Come with Mini cooling fan, Robber feet and Screwdriver,Convenient to use
Works for ASUS SBC Tinker board Made out of high quality Aluminum material High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation Smart design,not block the wifi/BT signals Come with Mini cooling fan, Robber feet and Screwdriver,Convenient to use Package List: Tinker board Alu case*1 Cooling fan*1 Screwdriver*1
Similar items with 4 stars and above
anidees Aluminum Open Frame case for Raspberry Pi 4 Model B/ASUS Tinker/Google Coral Dev Board, Support Seeed ICE Tower CPU Cooling/HiFiBerry DAC+Pro 2 (Pi4, DAC NOT Included)– Black(AI-OP-FR)
- Panoramic Open frame design: It comes with 6 mm aluminum plus shockproof copper feet stand to provide durability and flexibility.
- Compatible with Raspberry PI4 B/ PI3 B/ PI3 B+, ASUS Tinker Board S, Google Coral Dev Board, (support the screw hole dimension of the board : 58 x 49mm)
- Unlimited flexibility: Harmonious, refined and striking design with easy access to all inputs and outputs, support powerful speeed ICE Tower CPU Cooling Fan, HiFiBerry DAC+Pro / NanoSound DAC2
- Raspberry Pi, DAC board, Cooler is NOT INCLUDED.
Material Aluminum, Copper, Rubber
Dimension (W / H / D) L*W*H 79 x 100 x 20mm / 3.11 x 3.94 x 0.79 in
Weight 110g / 0.24lbs
Mother Board Type Raspberry PI4 B/ PI3 B/ PI3 B+, ASUS Tinker Board S, Google Coral Dev Board, (support the screw hole dimension of the board : 58 x 49mm)
Conclusion
By our suggestions above, we hope that you can found asus tinker board cooling case for you.Please don’t forget to share your experience by comment in this post. Thank you!
