Best Alphacool Ram Cooling

Due to the new Alphacool D-RAM modules all memory blocks can easily and quickly be equipped with water coolers! A fight against the underrated heat source “memory” has been announced with the new system of the Alphacool D-RAM coolers . With these modules, the memory blocks are clamped in the modules (with the attached thermal pads) to achieve optimum cooling results . The seperately available D-RAM coolers are added and screwed in at the required siz after successfull assembly. We recommend a very thin layer of thermal paste applied between module and cooler for an optimal heat transfer. Note: A thicker thermal pad must be used on one side for single-sided memory blocks which is not included and has to be bought seperately. Scope of delivery: 2x modul for D-RAM 4x thermal pads fitting accessories Download 3D-file (.stp)

With the new D-RAM coolers all desired memory chips can be cooled. This cooling block is screwed onto the optional cooling modules or existing heatspreader with a hole spacing of 110mm (like the Corsair Dominator). Due to its black nickel ground and black or transparent cover with lighting capabilities is the RAM cooler adaptable for each individual system . It is (availaible in/distinguished by) three different sizes: 2, 4 or 6 RAM modules which can be cooled parallel. Due to its special technology, the RAM cooler can be used in both, high-flow systems as well as in lower flow systems, at the optimal level. Technical Details: Material: Copper (black nickel) Colour: plexi (transparent) Connection thread: 2x 1/4″ Dimensions (LxWxH): 128 x 45,2 x 11,1mm RAM modules: 1 – 4 Scope of delivery: 1x D-RAM cooler X4 Universal Download 3D-file (.stp)

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 14 x 14mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 14x14mm – 10pcs

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 6,5 x 6,5mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 6,5×6,5mm – 10pcs

Alphacool ’s ultimate solution to cool your computer with a layer of ice. Not frozen water but a sensational new thermal pad: With up to 17 W / mk pads surpass all previously-seen thermal pads and pastes. So now practically all hardware components can be easily and cleanly covered with ice! The “Alphacool Eisschicht” offers all the benefits and features of a typical thermal pads: self-adhesive, elastic, adaptable, and more! It canbe used in many applications: RAM and motherboard coolers or graphics cards and CPU coolers, wherever board meets heatsink you are well advised with the Alphacool Eisschicht. The pads are available in different power levels, 11, 14 and 17W / mk each available in 0.5mm, 1mm and 1.5mm thickness to be able to compensate for differences in height perfectly. Likewise, any thickness is again available in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily cut with scissors to separate the right size for each component to be individually configured.

The MCX one miniature waterblock offers a multitude of possibilities. It allows most efficient cooling of e.g. RAM modules on graphics cards or VRM modules and can be mounted easily. If the criteria is flexibility and design in combination with optimal performance, the MCX one is an adequate solution. Your investment is also long-term as the MCX components can be used again if e.g. purchasing a new graphics card. Technical specifications: Dimensions: 15x15x5mm Material: Nickel plated copper Tubing size: 3mm inner diameter Download 3D-file (.stp) Please note: For mounting of this cooler we recommend our self-adhesive thermal pads (Item no.: 31085, 31086, 31087 or 31084) This product has been reviewed for you: Radeon3d

The world renowned manufacturer Alphacool presents the new HDX Intel Optane SSD 900P water cooler. With this cooler, you can ensure that your Intel Optane SSD 900P always offers the maximum possible performance without any throttling caused by heat. All SSDs can get extremely warm under permanent load and at a certain temperature, the SSD clocks down which in turn can cause a huge performance loss in transfer rates.

With active water cooling you can significantly lower temperatures and as with the pre-assembled passive cooler, throttling due to high temperatures can no longer occur.

Another benefit to the Alphacool HDX Intel Optane 900P water cooler is that it can prolong the SSDs lifetime. Because the service life of electronic components is directly related to the temperatures. The warmer an electronic component becomes, the shorter its life is. Water cooling keeps temperatures at a much lower level, thus extending the lifetime.

Aesthetically, the Alphacool HDX Intel Optane 900P cooler with its Plexifix creates a real feature and looks great as it allows you to directly observe the water flowing in the cooler.

Technical:

Dimensions (LxWxH): 166 x 79 x 15 mm
Materials: nickeled copper, plexi

Included in packaging:

1x Alphacool HDX – Intel® Optane SSD900P – Plexi
Thermal pads
Thermal paste
5x mounting screws

Model: 11572

The small heat sinks are the perfect addition for cooling various electronic components such as the graphics card VRam, the voltage transformer on a motherboard, or even in a power amplifier or in RC vehicles. To ensure maximum heat capacity and cooling performance, the coolers are made of copper. Alphacool uses a special coating to prevent the infamous greenish discolouration on copper as much as possible. This increases the lifespan of the cooler and ensures steady cooling performance. The coolers can be installed onto the desired components with optional thermal paste or self-adhesive thermal pads. Technical Data Dimensions: 10 x 10mm Material: Fullcopper Scope of Delivery Alphacool GPU RAM Copper Heatsinks 10x10mm – 10pcs

Conclusion

By our suggestions above, we hope that you can found alphacool ram cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!