kinsunny 
Nowadays, there are so many products of hard tube liquid cooling in the market and you are wondering to choose a best one. You have searched for hard tube liquid cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hard tube liquid cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific C360 Ddc Res/Pump 5V Motherboard Sync Copper Radiator PETG Hard Tube Water Cooling Kit CL-W243-CU12SW-A
- Analog/digital lighting Analog lighting allows a selection of 7 lighting effects with the included a RGB Controller. Connect lights to select 5V RGB Capable motherboards TO utilize digital lighting schemes from as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, and ASROCK polychrome Sync
- All included the C360 hard tube Kit contains a CPU water block, pump/reservoir, radiator, fans, fittings, tubing, and coolant, which are components necessary to complete a CPU water cooling loop
- Slim copper radiator the C360 is engineered with 12 copper flat tubes and 17 fins per Inch. This radiator’s 27mm thick design assures fitment compatibility with most form Factor chassis
- C pro fittings build like a Pro with a new take on compression fittings. Engineered with four Built in O rings to provide maximum leak prevention and a secured compression seal
- Exclusive components W4 a RGB Edition water block, T1000 pure Clear Coolant, and a new pr15 ddc pump/reservoir combo
- 2 years
Thermaltake Pacific C360 DDC hard tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six C-Pro G14 PETG 16mm OD compressions, eight v-Tobler PETG tubes, an a RGB LED controller, and other accessories. p/N: cl-w243-cu12sw-adimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific C-Pro G14 PETG 16mm OD compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1tube- V-Tobler PETG tube 16mm OD 500mm x 8accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1- silicone insert x1. Do not let the pump run dry, when there is no liquid entering the pump turn off your power immediately
Similar items with 4 stars and above
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
P/N: CL-W214-CU00BL-B
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
Barrow ABS 16MM Hard Tube Bending Kit, Black
Barrow ABS 16MM Hard Tube Bending Kit, Black
Model: AWGM3-16
Thermaltake Water 3.0 Triple Riing RGB High Static Pressure Fans 360 AIO Liquid Cooling System CPU Cooler CL-W108-PL12SW-A
- Smart Fan Controller : Switches between 5 LED modes including solid colors of red, blue, white, green or disable and cycle through 256 colors
- Riing 12 LED RGB 256 Colors Radiator Fan : The patented circular multicolored 120 millimeter RGB radiator fans with high static pressure design, producing impressive cooling performance
- High Efficiency Radiator: 360 millimeter large surface radiator supports up to 6 x 120 millimeter fans for additional heat dissipation
- Durable Sleeved Cable and High Performance Waterblock : Cable sleeve design delivers the best durability and prevents the tubing surface from any damages and scratches
- High Reliability Pump: Enables the maximum amount of water circulation, keeping the copper plate continuously cool
- Simple Setup
- Tt LCS Certified: Liquid Cooling Supported. Compatible with extreme liquid cooling configurations
Thermaltake Water 3.0 Riing RGB 360 Edition PWM AIO Tt LCS Certified Liquid Cooling System 3 Year Warranty CL-W108-PL12SW-A
Take your CPU to new heights with the Thermaltake Water 3.0 Riing RGB 360 Edition AIO Enthusiast Liquid Cooling System. From stock to overclock, the Water 3.0 Riing RGB Series fits the needs for CPU cooling performance with minimal maintenance for an all-in-one solution. With a high performance copper base plate, Patented Riing RGB LED Fans, universal socket compatibility and 360mm large surface radiator, gain up to 3X in cooling performance over stock CPU coolers. Experience extreme cooling performance and low noise to protect your most vital component from heat with the Water 3.0 Riing RGB Edition from Thermaltake.
Key Features:
- Patented PWM Riing 12 RGB LED Fans
- 360mm Aluminum Radiator
- Sleeved Tube with Copper Cold Plate
- Maintenance Free Operation
- 3 Year Warranty
Compatibility:
Intel LGA 2011-3/2011/1366/1156/1155/1151/1150
AMD FM2/FM1/AM3+/AM3/AM2+/AM2
Water Block:
Material Copper
Pump:
Rated Voltage: 12 V
Rated Current: 175 mA
Fan:
Dimension:120 x 120 x 25 mm
Speed:800 ~ 1500 R.P.M
400 ~ 1000 R.P.M (Low Noise Mode)
Noise Level:18.5 ~ 26.4 dB-A
Rated Voltage:12 V
Max. Air Flow:22.14 ~ 40.6 CFM
Max. Pressure:0.57 ~ 2.01 mm-H2O
Connector:4 pin
Radiator:
Dimension:326 x 120 x 27 mm
Tube:
Length:326 mm
Material:Rubber
Weight 1320g
Similar items with 4 stars and above
Barrow Hard Tube Tool Suite for 14mm OD Rigid Tubing
Designed for users looking to create bends using 10mm ID / 14mm PETG tube, each kit contains Mandrels for 180 degree, 90 degree and 45 degree bends. Silicone insert supports tube during the bending process to prevent kinks and promotes smooth bends while keeping inner tube wall structure. Finish up your masterpiece with the pipe cutter for a near perfect beveled cut every time. Includes mandrel set, chamfer tool, cutters, and silicone insert.
Model: YRT
Bewinner DIY 240mm Water Cooling Kit, DIY 240mm Cooler CPU/GPU Block Pump Reservoir with LED Fan Heat Sink Computer Water Cooling Connectors Kit, All-in-one Liquid CPU Cooler Kit
- 【Professional Water Cooling Kit】All included:240mm heat sink+CPU/GPU cooling Block+2pcs LED fans+water pump with shock pad+Cylindrical Water Reservoir+Transparent Hose+A Set of Water Pipe Connectors.
- 【Super Water Circulation Cooling System】18 Pipe Aluminum Heat Exchanger Radiator,9W 600L / H Waterproof G1/4 Thread size High quiet water Pump,160mm High capacity Cylindrical Water Reservoir make the circulation system clear and visible,The extreme performance dual LED fans offer a high air static pressure.
- 【Universal Water Cooling Block】The CPU water cooling block made of copper and transparent plexiglass suitable for INTEL / AMD Dual Platform,the 0.8MM parallel waterway G1/4 universal thread GPU water cooling block made of copper and POM high temperature materials support 9.5mm ID / 12.7mm OD PU tube,or 10mmID/16mmOD solid tube,or 8mmID/12mmOD silicon tube.
- 【Complete Accessories】A Set of Water pipe joints & hose clamp & plug and a Inner diameter 8mm/Outer diameter 12mmTransparent hose,So you don’t have to worry about installation at all.
- 【100% Satisfaction Guarantee】 If you have questions about the product or are not satisfied with it, please contact us at any time, we will provide you with a best solution. Your satisfaction is our main concern.
Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.
Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass
Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs
Similar items with 4 stars and above
Thermaltake Pacific DIY LCS Black G1/4 PETG 16mm (5/8") OD Tube 45 Degree Compression Fitting Cooling – CL-W096-CA00BL-A
- High Flow Leak Free Design: The fittings allow proper connection to G1/4 ports, securing properly to cooling components while providing an even seal around the tubing
- Black Coating Brass Fitting
- G 1/4″ Port
- For PETG Tubes: Outer Diameter 5/8″ (16mm)
- 3 Pre-installed O-Ring: Prevent coolant from leaking
The Thermaltake Pacific PETG Fittings provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in black coatings, take every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake. 2 Year Warranty.
Yencoly 90 Degree Water Cooling Fitting, 14mm OD G1/4 DIY Twist 90 Degree Elbow Dual Hard Pipe Tube Connector Water Liquid Cooling Cooling pc 90 Degree Elbow Tube(Black)
Description:
The water cooling fittings provides a perfect solution for enthusiast and custom PC builders to meet the needs of DIY and then setting up a complete water cooling system. With G1/4″ durable copper fittings, finished in chrome coatings, take every detail seriously.
Features:
With silicone seal, provides an even seal around the tubing.Prevent coolant from leaking.
Chrome plated brass fitting, more durable.
For PETG Tubes: Outer Diameter 5/8″ (16mm)
Excellent Heat dissipation
High quality and stability.
Specifications:
Product Name: dual pipe quick twist 90 ° elbow
Thread size: G1/4 The actual outer diameter size is 12.9MM
Material: brass
Surface treatment: chrome-plated
Seal: with silicone seal
Size: Support diameter 14MM pipe
Color: black, silver(Optional)
Package List:
1* 90 Degree Tube Connector
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found hard tube liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
