kinsunny 
Nowadays, there are so many products of raspberry pi model 3 b actrive cooling in the market and you are wondering to choose a best one. You have searched for raspberry pi model 3 b actrive cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi model 3 b actrive cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Miuzei Case for Raspberry Pi 4 with 5V DC Cooling Fan, 4 Pcs Heat Sinks for Raspberry Pi 4 Model B
- Four- layer case updated for raspberry pi 4, much simple than multiple layers case for assembly(Not include Pi 4 Board)
- The case protects the pi and all ports were easy access and inputs are still available. Transparent layer is nice to see the tech behind the machine.
- Better heat dissipation performance with large 35*35mm fan with four heat-sinks to keep your Pi cooler, especially that mid-plate trapping the air from the fan could be better circulation for heavy CPU loads.
- The rubber feet on the bottom of the case, elevate the nuts from contacting the surface and provides a stable platform that allows air to circulate on the bottom side of the board.
- Package Included: Pi 4 Case, Cooling Fan(35mm), 4 Aluminum Heat Sinks, 4 Rubber Feet, Screwdriver
Miuzei Raspberry Pi 4 Case -new design showcases the RPi and keeps it much cooler.
・No tedious stack-Much simple for assembly than multiple layers case.
・Pretty blue heat sinks and cooling fan could do help a lot for overclocking.
・Fan setup with 5volt is still absolutely silent and works well.
Package Included:
1xMiuzei case
1xCooling Fan
4x Aluminum Heatsinks：1× 25*25*5mm, 1× 15*10*6mm, 2× 7*7*6mm
1x Screwdriver
4x Rubber feet
Note:
Please remove the protective film on the top and bottom layers(on both sides)before you set it up.
LoveRPi 5-Pack Performance Heatsink Set for Raspberry Pi 3 Model B+ (10 Heatsinks)
- EXTREME PERFORMANCE: Straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Mandatory for applications in high temperature, sealed, or overclocked applications.
- LONG LASTING EXACT FIT: CPU and LAN chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. Double-sided 3M thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
- QUICK AND SIMPLE INSTALLATION: Peel and stick in the orientation with the most airflow. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+.
- NO MORE THROTTLING: Reduce chip hot-spots and increase thermal dissipation surface area by 10x. For Raspberry Pi 3 Model B, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance.
- MUST HAVE FOR RASPBERRY PI 3: At full load, BCM2837 SoC will reach 100°C. That is hot enough to boil water! Together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.
Included Parts:
- Large Straight-Fin Heatsink with 3M adhesive for SoC
- Small Straight-Fin Heatsink with 3M adhesive for LAN Chipset
Supported Boards:
- Raspberry Pi 3 Model B+
- Raspberry Pi 3 Model B
- Raspberry Pi 2 Model B
Additional Boards supported by Large Heatsink:
- Libre Computer Board ALL-H3-CC
- Libre Computer Board AML-S905X-CC
- Libre Computer Board ROC-RK3328-CC
- Banana Pi M3 (Allwinner A83T)
- Orange Pi Boards with Allwinner H2+/H3/H5
Argon One Raspberry Pi 3 B+ / B Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA CASE | This sleek aluminum case not only brings out stunning aesthetics, but it’s also highly functional by protecting the Raspberry Pi from harm and being usable for pastimes such as retro gaming, watching movies, or even playing music. This case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)
- ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC.
- INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market.
- QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection.
- MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor).
- TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results.
Supported Single Board Computers:
- Raspberry Pi 3 Model B+
- Raspberry Pi 3 Model B
- Raspberry Pi 2 Model B
- Raspberry Pi Model B+
- Libre Computer Board AMl-S905X-CC
- Libre Computer Board ALL-H3-CC
- Libre Computer Board ROC-RK3328-CC
- ASUS Tinker Board S
- ASUS Tinker Board
- ODROID-C2***
- ODROID-C1+***
***MicroUSB Power Only, DC Jack not supported. MicroSD card inaccessible due to different positioning.
LoveRPi Power-Over-Ethernet (PoE) HAT for Raspberry Pi 3 Model B+
- ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters.
- BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
- STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED: The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. “Passive PoE” (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
- VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 3 Model B+ must be adequate to ensure performance and stable operation. This product features onboard 5V and 3.3V fan headers and was designed for the LoveRPi Active Cooling Media Center PC case.
- NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODELS: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the newer HAT specifically for Raspberry Pi 4.
Input: IEEE 802.3af Compliant PoE
Output: 5V +-5% up to 2.5A*
Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
* Active airflow and adequate cooling required for stable continuous operation at high load.
Install PoE HAT onto the 40-pin GPIO header. Attach black wire from fan to GND pin on PoE HAT. Attach red wire from fan to 5V (performance) or 3.3V (quiet) pin on PoE HAT. Insert MicroSD card with properly flashed OS. Attach Ethernet cable from a 802.3af PoE switch.
Raspberry Pi 3 Desktop Starter Kit (Black)
- The Raspberry Pi 3 Model B builds upon the features of its predecessors with a new, faster processor on board to increase its speed. It also features WiFi and Bluetooth Low Energy capabilities to enhance the functionality and the ability to power more powerful devices over the USB ports.
- 16GB Class 10 MicroSD (Pre-installed with Raspbian OS and NOOBS installer)
- Official Black Raspberry Pi 3 HAT compatible Case – Easy snap fit assembly
- Official Black Raspberry Pi 5.1V 2.5A Power Supply (UK, EU, USA & Australia)
The Raspberry Pi 3 Model B Official Desktop Starter Kit is great fun for both beginners and experienced coders. It’s fully branded with the famous Raspberry Pi Logo featured on all the accessories including the Case, Power Supply and SD Card. The kit comes with the latest Raspberry Pi board (The Raspberry Pi 3 Model B) as well as the official 16GB SD Card with the Pre-installed with Raspbian and NOOBS operating system. The cool black color and the full branding with the famous Raspberry Pi logo looks great.
Micro Connectors Aluminum Raspberry Pi 3 Model B B+ Case with Fan and Heatsinks – Black (RAS-PCS04-BK)
- Compatible with Raspberry Pi 1 model B+, Pi 2 model B, Pi 3 model B/B+
- 40mm fan and heat sinks kit included
- Quality and durable aluminum casing to dissipate heat
- Precision-cut casing allows easy access to all ports
- Wall mount Compatible
- Anti-slip rubber feet pads
The MICRO CONNECTORS aluminum case with fan for Raspberry Pi is made out of quality and durable aluminum. The precision-cut casing allows for easy access to all your ports and the durable aluminum looks sleek. The included active 40mm fan and heat sinks kit cools down the temperature generated from the board and prevents overheating. This versatile case is compatible with Raspberry Pi 1 model B, Pi 2 model B, Pi 3 model B/B. With four colors to choose from, this Micro connector aluminum case is the best choice for your raspberry Pi.
LoveRPi Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ (Professional, Isolated (3KV))
- ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 4: Deliver clean and reliable power to the latest Pi 4! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 4 Model B sold separately.
- GALVANICALLY ISOLATED POWER OVER ETHERNET UP TO 3KV: Designed for IEEE 802.3af, IEEE 802.3at, and Passive DC 48V network switches and power sourcing equipment (PSE). The professional model features galvanic isolation for applications with non-IEEE 802.3 compliant switches and power injectors that do not provide PSE side isolation.
- BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 4 Model B boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
- VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B must be adequate to ensure performance and stable operation.
- BACKWARDS COMPATIBLE: Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+.
- Input: IEEE 802.3af Compliant PoE or DC 48V PoE with up to 3KV Isolation
- Output: 5V +-5% up to 2.5A*
- Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
- * Active airflow and adequate cooling required for stable continuous operation at high load.
Install PoE HAT onto the 40-pin GPIO header. Attach black wire from fan to GND pin on PoE HAT. Attach red wire from fan to 5V (performance) or 3.3V (quiet) pin on PoE HAT. Insert MicroSD card with properly flashed OS. Attach Ethernet cable from the PSE.
Raitron DIY Ultra Slim Low Noise Active Cooling Mini Fan for Raspberry Pi 3 Model B / 2B / B+
Descriptions:
This is a mini ultra slim pi fan with 2.54 plug, you can insert directly it into GPIO Pin.
Features:
Dimension: 30 x 30 x 7 mm
Power supply: DC 5V
Current: 0.2A
It’s suitable for Raspberry Pi 3 Model B / 2B / B+
Note: Raspberry Pi mian board and case are not included.
Package included:
1 x Fan
4 x Screws
4 x Nuts
Conclusion
By our suggestions above, we hope that you can found raspberry pi model 3 b actrive cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
