kinsunny 
Nowadays, there are so many products of water filter for big blue pentek in the market and you are wondering to choose a best one. You have searched for water filter for big blue pentek in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water filter for big blue pentek which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Pentek 1" Threaded 20" Genuine Big Blue Filter Housing Kit | Complete with Bracket, Screws and Wrench (150233 150061 144368)
- HIGH FLOW – HEAVY SEDIMENT : Large filter housing for high-flow and heavy sediment applications
- COMPLETE KIT : Housing comes with Stainless Steel Bracket, Screws and Wrench – Guaranteed to fit!
- QUALITY MATERIALS : Reinforced & High-Flow Polypropylene, Stainless Steel bracket & Screws
- PRESSURE RELIEF : Pressure relief button to remove pressure for easier cartridge replacement
- WARRANTY : One year limited warranty – see Pentek Inc. for details
This complete kit comes to you from Better H2O Products Inc which includs :
✪ Genuine Pentek 1″ #20 Big Blue filter housing (Pentek # 150233) with pressure relief valve,
✪ Genuine Pentek stainless steel bracket with stainless steel screws (Pentek # 150061) [which will not rust like white painted ones]
✪ Genuine Wrench (Pentek # 144368)
✪ All guaranteed to fit!
Don’t assume the parts will fit – order the complete kit!
All parts of this kit come neatly packaged in a single box
► Initial pressure drop of 2 psi at a flow rate of 15 gpm
►Suitable for high-flow and heavy sediment applications
►Whole home filtration, food and service, irrigation and more applications
►Opaque blue sump is made from reinforced polypropylene for strength and chemical resistance
►Black cap is made from high-flow polypropylene (HFPP) for stiffness
►1” female National Pipe Thread Taper (NPT) threaded input and output connections
►Nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal
►Pressure relief button on inlet to release pressure for easier filter changes
►Can be used with a 20” x 4-1/2” filter cartridge (sold separately)
►Maximum operating pressure of 90 psi
►Maximum operating temperature of 100 degrees F (37.8 degrees C)
►NSF 42 Certified for quality assurance
Pentek EP-20BB Carbon Block Filter Cartridge, 20" x 4-5/8", 5 Microns
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 5 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 5.5 psi at a flow rate of 5 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
This Pentek EP-20BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 40,000 gallons at a flow rate of 4 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 5.5 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.
Specifications
| Nominal filtration rating | 5 microns |
| Initial pressure drop at 5 gpm | 5.5 psi |
| Chlorine reduction capacity | 40,000 gallons at 4 gpm |
| Temperature range | 40 to 180 degrees F (4.4 to 82.2 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-5/8 inches (508 x 118 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Pentek 155358, DGD-5005-20 Dual Gradient Density Polypropylene Sediment Cartridge
This Pentek DGD-5005-20 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 20 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 20 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Pentek RFC20-BB Carbon Filter Cartridge, 20" x 4-1/2"
- Reduces chlorine taste and odor in drinking water
- Granular activated carbon (GAC) media with spun polypropylene core and polypropylene end caps for strength
- Porous polyethylene 70-micron outer shell reduces carbon fines and other particles
- Initial pressure drop of 0.90 psi at a flow rate of 4 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Pentek 153070 #20 Big Blue Housing Sump
Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
- Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
- Combines two separate gradient layers for higher efficiency and dirt-loading capacity
- Spun polypropylene for resistance to chemicals and bacteria
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Specifications
| Nominal filtration rating (pre-filter) | 50 microns |
| Nominal filtration rating (post-filter) | 5 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 145 degrees F (4.4 to 62.8 degrees C) |
| Maximum dimensions (H x W) | 10 x 4-1/2 inches (254 x 114 mm) |
| Materials certification | NSF/ANSI standard 42 |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Aquaboon 5 Micron 20" Big Blue Pleated Sediment Water Filter Replacement Cartridge | Whole House Sediment Filtration | Compatible with ECP5-BB, AP810-2, HDC3001, CP5-BB, SPC-45-1005, ECP1-20BB, 2-Pack
- ???? [DIMENSIONS] 20 inches x 4.5 inches – 2-PACK Of 5 Micron Big Blue Pleated Sediment Water Filter. Universal replacement – fits most 20 inch Big Blue Water Filter housings.
- ???? [QUALITY FILTRATION] Made of 100% Pure POLYPROPYLENE Microfibers. Whole house sediment filtration. Contains no binders, agents, solvents, antistatic materials or wetting agents. This cartridge is pleated, it provides increased surface area and longer filter life. Pleated cartridge provides “depth” filtration and remove more contaminants, large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles.
- ???? [LIFETIME] 4 – 6 months / 20000 – 30000 gallons (depending on the water quality). Replace for great taste of your water.
- ???? [COMPATIBLE REPLACEMENT FILTERS] Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5.
- ???? [COMPATIBLE FILTERS AND HOUSINGS] Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.
2 OF BIG BLUE WHOLE HOUSE 20 INCH X 4.5 INCH PLEATED SEDIMENT WATER FILTER REPLACEMENT CARTRIDGE (5 MICRON)
Pleated Sediment Filter Cartridge outperforms wound, spun, melt blown, resin bonded and other “depth” type filter elements. It provides increased surface area and longer filter life. Additional savings are provided because cartridge is made with 100% synthetic filter media with no binders or additives to leave a residue or contaminants.
Product Details:
Micron Rating: 5 Micron
Dimensions: 20” x 4.5”
Long life / reduced filtration costs
Cleanable and reusable
Wide range of micron ratings available
Shrink wrapped for purity
Lifetime: Replace two or three times a year, depending on the water quality that comes from the original supply.
Benefits VS Melt Blown Sediment:
Long Pressure drop, longer life, reduced filtration costs compared to wound and spun cartridges
Increased dirt holding capacity which results in longer filter life, fewer filter replacement needed, and reduced filtrations costs, comparing to other pleated cartridge suppliers
COMPATIBLE FILTERS AND HOUSINGS:
Ace Hardware 4021341, American Plumber 155184-51, W5CPHD, Ametek CP5-BB, AquaPure AP810-2, Culligan 155184, CP5-BB, CP5-BBS, CP5-BBSa, ClearChoice 84634, 84646, 84647, Cuno CFS210-2, Dupont HDC3001, Flowmax FM-BB-20-1, FreshWaterSystems PS-45097-05, PS-45200-01, OmniFilter RS15, RS-15, FreshWaterSystems PS-45200-05, Harmsco HB-20-1W, HB-20-5W, WB-HB-20-1W, WB-HB-20-5W, Hydronix SPC-45-1005, SPC-45-2001, SPC-45-2005, Keystone GPC5, Liquatec SPF-45-1005, SPF-45-2005, Neo-Pure PS-45097-05, PS-45200-01, PS-45200-05, Pelican PBBB-P20-5, PBB-P20-1, PBB-P20-5, Pentek 255490-43, 255493-43, 255494-43, ECP1-20BB, ECP5-20BB, ECP5-BB, Purwater PC05-BB-S, ShurFlo 15-054-02, Watts FM-BB-20-5, PWPL20BBM5, WPC1FF20, etc. Fits most 20 inch Big Blue Whole House systems.
Pentek GAC-BB Drinking Water Filter (9-3/4" x 4-1/2")
Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief
Conclusion
By our suggestions above, we hope that you can found water filter for big blue pentek for you.Please don’t forget to share your experience by comment in this post. Thank you!
