kinsunny 
Nowadays, there are so many products of sticky 3m rubber in the market and you are wondering to choose a best one. You have searched for sticky 3m rubber in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings sticky 3m rubber which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
26,888 Reviews Scanned
Scotch Linerless Electrical Splicing Tape 130C for Wires and Cables, 1-1/2 in x 30 ft, Rubber Backing, Self Fusing, UV Resistance, Highly Conformable, Moisture Seal, Black, 1 Roll
- RUBBER-BASED ADHESIVE and the self-fusing, ethylene propylene, rubber backing provides UV resistance.
- EXCELLENT PHYSICAL AND ELECTRICAL PROPERTIES promote moisture seal and void-free buildups.
- DESIGNED FOR USE IN SPLICING and terminating wires and cables. Rated up to 90 degrees C (194 degrees F) continuous operating temperatures and short-term 130 degrees C (266 degrees F) overload service.
- PROVIDES EXCELLENT THERMAL DISSIPATION of splice heat.
- LINERLESS, SELF-BONDING, PRIMARY insulating tape rated through 69 kV (volts). This product can be used for low and high-voltage (through 69 kV) applications.
- Meet ASTM D4388, D4325, and C518. RoHS 2011/65/EU Compliant.
Product Description
Scotch Tape 130C is a linerless 30-mil thick, premium-grade, rubber splicing tape used for splicing and terminating cables and wires. It withstands temperatures up to 194 degrees F (90 degrees C) with emergency overload up to 266 degrees F (130 degrees C). The tape has excellent electrical and mechanical properties to provide moisture-seal protection.
From the Manufacturer
^
3M Linerless Electrical Rubber Tape 2242, 1-1/2 in x 15 ft, 1 in core, Black
- Rubber-resin adhesive provides excellent adherence while self-fusing, ethylene propylene rubber backing resists UV rays and heat
- Tape measures 1-1/2 in x 15 ft x 30 mil
- Comes in black color
- ASTM Approved and RoHS 2011/65/EU Compliant
- This blue tape is crafted from PVC
Product Description
Scotch Tape 2242 is a linerless 30-mil thick, general purpose, electrical rubber tape that’s suitable for bus bar insulation and moisture sealing of cable ends. The high-voltage, flame-retardant tape ensures excellent tacking with its self-fusing, ethylene propylene rubber resin adhesive.
From the Manufacturer
This is a general purpose rubber insulating tape with an inner pack unit of 1 per bag with 12 rolls per case.
3M Nitrile High Performance Rubber and Gasket Adhesive 847, Brown
- High performance adhesive intended to bond gaskets
- Adheres to nitrile rubber (BUNA), neoprene, SBR, butyl, leather, vinyl and various rubbers
- Excellent fuel, oil and water resistance
- Offers resistance to heat and moisture, performing in temperatures up to 300°F/148°C
- Optional heat cure increases bond strength
3M Nitrile High Performance Rubber and Gasket Adhesive 847 is a versatile, solvent based, high performance adhesive with comparatively low viscosity for easy application. It offers both good oil resistance and good heat resistance, and is commonly used for bonding most rubber and gasket materials.
Scotch Linerless Electrical Splicing Tape 130C for Wires and Cables, 1 in x 30 ft, Rubber Backing, Self Fusing, UV Resistance, Highly Conformable, Moisture Seal, Black, 1 Roll
3M Scotch-Weld Plastic & Rubber Instant Adhesive PR40, Clear
Scotch Bumpers, 20 Bumpers/Pack, Clear, 1/2", (SP950-NA)
Soften the slam with the quieting power of Scotch Bumpers. Designed to protect your cabinets and drawers from scratching on the surface, these discreet furniture bumpers reduce impact to absorb sound. They’re also great for ensuring your framed art hangs flush against your walls or adhering to the bottom of coasters to protect your surfaces. So, no matter how you use Scotch Bumpers, rest assured your furniture, surfaces and ears will thank you.
Similar items with 4 stars and above
3M Scotch 5952 VHB Tape: 1/2 in. x 15 ft. (Black)
- Adhesion: 320 ounces per inch (to stainless steel test panel)
- Tensile Strength: 90 pounds per inch (longitudinal)
- Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
- Dynamic Overlap Shear: 80 pounds per square inch
- Carrier/Backing: closed cell acrylic foam
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information– Core: 3 inch diameter
– Backing/Carrier: closed cell acrylic foam
– Adhesive: modified acrylic
– Release Liner: red PE film
– Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
– Adhesion: 320 ounces per inch (to stainless steel test panel)
– Tensile Strength: 90 pounds per inch (longitudinal)
– Application Temperature: 50F to 100F
– Service/Operating Temperature: up to 250F
3M Scotch 5952 VHB Tape: 1 in. x 15 ft. (Black)
- Adhesion: 320 ounces per inch (to stainless steel test panel)
- Tensile Strength: 90 pounds per inch (longitudinal)
- Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
- Dynamic Overlap Shear: 80 pounds per square inch
- Carrier/Backing: closed cell acrylic foam
3M 5952 Heavy Duty Mounting VHB Tape is black, double-coated VHB adhesive tape with an acrylic foam core. A modified acrylic adhesive is on both sides of very conformable foam which provides adhesion to the broadest range of substrates/surfaces, including most powder coated paints. Comes on a red film release liner.
3M VHB Tape provides the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior bonding applications. In many situations, they can replace rivets, spot welds, liquid adhesives and other permanent fasteners. Recommended to use 4 square inches of 5952 VHB tape for every 1 pound of load; although rough surfaces may require additional tape. These VHB tapes are made with acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability and excellent solvent and moisture resistance. See http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/ for videos showcasing the properties of VHB tape. Made in the U.S.
NOTES: As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information• Core: 3 inch diameter
• Backing/Carrier: closed cell acrylic foam
• Adhesive: modified acrylic
• Release Liner: red PE film
• Thickness: 50 mils (carrier, adhesive, liner) 45 mils (carrier, adhesive) 5 mils (liner)
• Adhesion: 320 ounces per inch (to stainless steel test panel)
• Tensile Strength: 90 pounds per inch (longitudinal)
• Application Temperature: 50F to 100F
•
3M Double Sided Tape, Strong Adhesive Sticky VHB Mounting Self Foam Clean Tape (0.71′ x 2.18 yd (1 Roll))
- Constructed with excellently clear acrylic material two sided tape & automotive double sided tape
- Excellent durability double face tape & self adhesive tape
- Best suited for industrial strength attaching, bonding, and mounting applications onto high surface energy substrates.
- Product has been converted from 3M VHB Tape 4910
- Comfortalb Use : home depot, automotive, craft tape, double face depot
Very High Bond Conformable Acrylic Foam Tape has adhesive both sides to promote excellent adhesion to a broad range of surfaces Cost effective cut to size shapes allows for ease of application 3M VHB Tape 4910 is a 45.0 mil thick clear double sided tape product cabable of achieving very high bonds. This is an industrial strength product that can be used for bonding high surface energy substrates like metal, glass, and plastic. This product features an excellent clear colored acrylic construction to limit aesthetic obtrusions. The acrylic construction will also provide excellent durability and logevity.
3M Temflex Rubber Splicing Tape 2155, 3/4 in x 22 ft, Black
- Rubber resin provides excellent adherence
- Self-fusing rubber backing offers durability and resists tears as well as abrasion
- Tape measures 3/4 in x 22 ft x 30 mil
- Comes in black color
- Withstands temperatures up to 176 degrees F (80 degrees C)
- UL Listed and RoHS 2011/65/EU Compliant
3M Temflex Tape 2155 is a 30-mil, general purpose, highly conformable, electrically insulating, low-voltage rubber splicing tape. The self-fusing tape is designed to offer guaranteed performance when used with solid dielectric cable insulations and has a liner, which will not stick to the tape upon unwind. It withstands a wide temperature range of 176 degrees F (80 degrees C).
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy sticky 3m rubber, eg:
- What are Top 10 sticky 3m rubber for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 sticky 3m rubber to buy?
- What are Top Rated sticky 3m rubber to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) sticky 3m rubber?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for sticky 3m rubber.
- Before deciding to buy any sticky 3m rubber, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose sticky 3m rubber and What you should consider when buying the sticky 3m rubber and Where to Buy or Purchase the sticky 3m rubber. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 sticky 3m rubber of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about sticky 3m rubber.
Conclusion
By our suggestions above, we hope that you can found sticky 3m rubber for you.Please don’t forget to share your experience by comment in this post. Thank you!
