Best Shot Glass Heating Element

Camco’s 5500W 240V screw-in ripple type ultra low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Premium Ultra LWD Lime Life elements carry a limited 5 year warranty. Ultra LWD and special metal surface (high performance nickel-chromium stainless steel alloy) reduce chances of lime build-up. They resist dry firing and are ideal for problem water areas and locations with intermittent water supply. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.

WB44T10011 is one of the most popular elements on the market. Compatible with GE, Hotpoint, and Kenmore/Sears models. This is not an GE OEM product. The GE brand names and logos are the registered trademarks of their respective owners. Any use of the GE brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

How To Test 279838 Heating Element:
To test your heating element you will need to first remove the heating element from the dryer. With the element removed from the dryer, do a visual inspection of the element. Often times you will be able to see a break in the heating coil. Sometimes it even helps to grab each section of the coil and wiggle it to make sure there isn’t a break in it. If you can’t see a break in the coil, then you will need an Ohm meter or Multi-Meter to test the heating element. Place one probe on each terminal of the heating element, you should get a reading of approximately 10 ohms on a good element. If you get no resistance, then the element is damaged and need to be replaced.

279838 Dryer heating element assembly – 5400 watt 240 volt. Transfer the high limit thermostat from your old heating element over to the new element. Don’t settle for lower quality heating elements.
Replaces 3403585 279837 8565582 3398064 3403585 AP3094254 W10724237 279838A 279838VP

279816 Thermal Fuse & Thermostat Kit – Dryer thermal fuse (thermal cut-off) 309 degrees and high limit thermostat 250 degrees kit – Wiring is used if your old high limit thermostat has one terminal that presses onto the heating element. Includes thermal fuse, thermostat, screws, wiring kit, and instructions. Make sure to check your dryer vent for any restrictions.
Replaces 3399848 3977393 2651 AP3094244 PS334299 EAP334299

3392519 Thermal Fuse – Dryer non resettable thermal fuse, two 3/16″ wire terminals. This fuse is located on the blower housing next to the blower fan. If the dryer overheats, the thermal fuse blows to cut off power to the dryer and/or stop the dryer from running.
Replaces WP3392519 3388651 694511 80005 ET401 G4AP0500 3392519

KONDUONE always offer the best customer service to his customers.If you have any problem about your order,please feel free to contact us.

This is a dryer heating element replacement for Whirlpool, Kenmore, Sears, Maytag, KitchenAid, Magic Chef, Amana, Admiral, Norge, Estate, Inglis, Roper, and Crosley. If your dryer does not heat first, check for a blown thermal fuse on the blower housing before replacing the heating element. In most cases, the heating element will have a break in the element if defective. Rated 240 volts and 5400 watts. It replaces 279838 PS334313 AP3094254 3398064 3403585 8565582 AH334313 EA334313, EED4400WQ0. Manufacturers’ part numbers are solely for identification. All materials supplied by us are our replacements for manufacturers’ parts. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Conclusion

By our suggestions above, we hope that you can found shot glass heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!