kinsunny 
Nowadays, there are so many products of rv oven hood exhaust vent in the market and you are wondering to choose a best one. You have searched for rv oven hood exhaust vent in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rv oven hood exhaust vent which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Camp’N RV Exhaust Vent Cover – RV Range Hood Vent/RV Range Hood Cover (White)
- ➊
- The Camp’N Replacement RV/Trailer/Camper Sidewall Vent is compatable with most popular ducted stove/rangehoods.
- ➋
- Each Camp’N RV Sidewall Vent INCLUDES HARDWARE!
- ➌
- Our High impact/weather proof materials will provide years of service.
- ➍
- Lockable clips prevent the internal flap from damaging itself during transport.
- ➎
- Rough opening size of 10 3/8″ by 3 1/2″
Are those exterior fittings/fixtures on your RV/Trailer getting old and brittle? Are they discoloring? Then definitely order a Camp’N RV Sidewall Vent to replace your old, beat up vent today!
Kohree RV Range Hood Vent Exhaust Vent Cover, High Impact Resistance RV Range Hood Cover Stove Vent Cover with Lockable Clips for RV Mobile Home, Screws Included
- ※Long-Lasting: Made of premium impact/weatherproof material, which can provide years of service.
- ※Stable: Built-in lockable clips can prevent the internal flap from damaging during transport.
- ※Wide: Work with large outlet static exhaust rang hoods, suitable for RV, mobile and manufactured housing. Will automatically open when range hood fan is on and closes when off.
- ※Size: Rough opening size of 10 3/8″ by 3 1/2″.
- ※Package includes screws for installation.
Heng’s (J116AWH-C Bright White Exhaust Vent Cover
- Heng’s Exhaust System
- This unit consists of an attractive exterior vent cover designed to keep rain and dust out of your vehicle with an outside manual release damper
- Once the outside manual release damper is unsecured, the damper automatically opens when the range hood fan is activated to allow cooking odors and smoke to be exhausted
- The damper automatically closes to prevent insects and dust from entering when the range hood is not in operation
- Bright White
Heng’s Exhaust System. This unit consists of an attractive exterior vent cover designed to keep rain and dust out of your vehicle with an outside manual release damper. Once the outside manual release damper is unsecured, the damper automatically opens when the range hood fan is activated to allow cooking odors and smoke to be exhausted. The damper automatically closes to prevent insects and dust from entering when the range hood is not in operation. The manual release damper must be secured before traveling. Dimensions: 4.62 Inch x10.88 Inch. Cutout: 4 Inch x 10.86 Inch. Bright White.
Dumble RV Range Vent Cover Exterior Vent with Locking Damper and Screws, RV Exhaust Vent Cover for RV Stove Vent – Black
- REPLACE YOUR OLD RV STOVE VENT FLAP: The Dumble Camper Range Hood Vent Cover in Black is an injection-molded styrene plastic RV vent range horizontal exterior wall vent that can be used with forced ventilation on large outlet static exhaust range hoods in your RV, camper, travel trailer, or mobile home kitchen
- PERFECT SIZE: Requires 10.3-inch x 3.5-inch (26.2×8.9 cm) opening and 1.7-inch (4.3 cm) inlet flange collar length (depth that goes through wall)
- 11.6-inch x 5.3-inch x 2.1-inch (29.5×13.5×5.3 cm) overall outside dimensions
- 10 total screw holes – top and bottom holes 3.75 inches (9.5 cm) apart (measurement center to center)
- side holes 2.4 inches (6.1 cm) apart
- Ensure that the overall size of the vent and its flanges are correct
- INSTALL IN MINUTES: Remove your hood (4 screws that go up through hood into cabinet underside), draw outline of this RV range hood exhaust vent insert on interior wall where hood meets wall, drill holes through wall at the corners of the outline, saw outline from interior, tuck installation into wall, saw outline from exterior, caulk/tape (not included) vent frame, press vent into opening, secure vent with the included screws, reinstall hood
- KEEP OUT THE BUGS & ELEMENTS: Features an RV hood damper that allows the external flap door to open when the exhaust fan is turned on while the 2 swivel friction locks latch the single flap (runs the length of the vent) in the closed position when traveling down the road
- Flapper stays in the closed position and only opens when engaged by turning on exhaust fan which them pushes the flapper open from the airflow
- Screen optional, not included
- PACKAGE CONTENTS: RV stove vent cover replacement package includes (1) jet black range vent for RV with (10) installation screws for your convenience
Chuck your old, discolored camper oven vent flapper and replace it with the Dumble Camper Hood Vent Cover in Black. It requires an approximate 10.3-inch x 3.5-inch opening and 1.7-inch inlet flange collar length (depth that goes through wall). If screw hole positions do not align with your old vent, simply drill holes in the required locations. This trailer range hood vent fits as long as the overall size of the vent and its flanges are correct. The external flap door opens when the exhaust fan is turned on, and the swivel friction locks latch the flap in the closed position when traveling down the road. Package includes (1) black RV oven vent cover and (10) screws. Use with forced ventilation only. We recommend adding caulk or putty tape (not included) on the inside edge for a tight seal. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Similar items with 4 stars and above
Dumble 12V RV Vent Fan Motor Replacement with D-Shaft – RV Fan Motor, Camper Vent 12 Volt Motor, RV Exhaust Fan Motor
- GOODBYE MOISTURE & SMELLS: Use the Dumble Bathroom Fan Motor 12V Vent Hood Motor with your existing fan to rid your RV, camper, or travel trailer of lingering smells and built-up moisture
- This roof vent motor is quiet and can be used to power an RV vent fan such as a bathroom fan or a range hood fan
- EASY TO INSTALL: Wire your fan to the motor switch, then wire the switch to your RV
- Ensure that the wires connect black to black (grounds) and the other wires connect together
- Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on)
- 3mm mounting screws and fan blade not included
- ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations
- Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground)
- To determine the direction of spin on your existing fan, look down through the motor at the top of the blade
- FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft
- 1-2/5-inch diameter x 2-1/5-inch length (36mm x 57mm) body
- Compatible with Elixir, Heng’s, Jensen, Ventline, and similar 6-inch (15.2cm) fan blades
- There are multiple heights for the bathroom fan motor assembly – Compare this unit measurements with your current exhaust fan motors unit to ensure exact fit
- BUILT TO LAST: 1.5W working power
- 5,000 RPM
- 18AWG*2 terminal connect cords (White 20-inch/50.8cm with 10-inch/25.4cm black jacket
- Black 10-inch/25.4cm with 7.5-inch/19.1cm black jacket)
- 12-volt DC (cigarette lighter) power connection (not intended for house or wall plugs)
Say goodbye to smells and moisture and hello to clean air with the Dumble 12V Bathroom Exhaust Fan Motor Replacement. This bathroom fan motor replacement is quiet and can be used for an RV vent fan such as a bathroom fan or a range hood fan. It is compatible with any 6-inch fan blade and vent system with a 0.125-inch D-shaped shaft. Not recommended for blades with bore holes that are larger than the vent motor shaft. You can pull your old plastic fan blades straight up and off from the old motor and reinstall the blades on this motor. Align and completely push the blade up to prevent it from hitting the vent cover or other surroundings. If the RV vent motor rotates in the wrong direction for your fan, simply reverse the wires on the motor. Installation hardware not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Heng’s J116BK-C Range Vent Exhaust Cover – Black
Save time and money! Heng’s J116BK-C Black RV Range Exhaust Cover prevents the need to replace the entire vent. In some instances, a simple damper replacement will fix the RV range hood ventilation. The vent damper consists of an attractive exterior vent cover designed to keep rain and dust out of your camper with an outside manual release tab. Once the outside manual release damper is unsecured, the damper automatically opens when the range hood fan is activated to allow cooking odors and smoke to be exhausted. Damper automatically closes to prohibit insects and dust from entering when the range hood is not in operation. Manual release damper must be secured before traveling.
Broan 413004 ADA Capable Non-Ducted Under-Cabinet Range Hood 30-Inch Stainless Steel
- Appliances/Range Hoods
- Made in: United States
- Dimensions: 8.4 X 33.4 X 19.8
- One-level lighting function. Fan blower air mover type
- Installs as ductless only (non-ducted) with charcoal filter
- Minimum Height Above Cook Top: 18 inches
- 75-watt cooktop lighting (bulb not included)
- Non-ducted filter – effective non-ducted filtration system removes smoke and odors
- Rocker-type fan and light control
- 2-Speed fan
- 30-inch Width by 17.5-inch Depth by 6-inch Height
Product Description
The 41000 series of non-ducted under cabinet hoods are made to exacting Broan standards, providing effective filtration, high quality and value. The range hood comes in a variety of appliance matching colors and widths, and includes a removable combination grease-charcoal filter for cleaner indoor exhaust recirculation, a fan designed for years of trouble free service, a protective lamp lens that distributes light evenly over the cook-top and control switches for fan speed and light activation. This range hood can work in an ADA-compliant application.
From the Manufacturer
The Broan 413004 Economy 30-Inch Two-Speed Non-Ducted Range Hood is Broan’s most economical duct-free hood with the exclusive Microtek system for filtration of airborne cooling contaminants. Installs as non-ducted only with charcoal filter. Accepts up to 75 watt light (bulb sold separately). Made of stainless steel.
Ventline (V2111-13 Polar White Horizontal Exterior Wall Vent
Exterior Vent for Ventline Ducted Range Hoods. Weatherproof outside vent features a lockable damper, heavy styrene construction and a 1-3/4 Inch inlet flange. Rough opening is 3-3/4 Inch x 10-1/2 Inch . Overall size 11-5/8 inch x 5-9/32 Inch . Polar White.
Broan 423023 ADA Capable Under-Cabinet Range Hood, 190 CFM 30-Inch, Black
- Installs as 7″ round ducted only
- 190 CFM, 6.0 Sone (vertical discharge) performance – HVI 2100 Certified
- Dishwasher-safe aluminum grease filter
- A protective lamp lens distributes light evenly over the cook-top and accepts up to 75W bulb (bulb not included)
- Built-in 7″ adapter
- Installs as 7-Inch round ducted only
- 190 CFM, 6.0 Sone (vertical discharge) performance
- Dishwasher-safe aluminum grease filter
- Accepts up to 75-Watt light (bulb not included)
- Built-in 7-Inch adapter
Product Description
The 42000 series offers an effective and durable under-the-cabinet hood solution for vertical discharge installations. The range hood is designed for 7-Inch round vertical duct attachment. The hood comes in a variety of appliance matching colors and widths, and features a fan designed for years of trouble free service, an easy to clean grease filter, an easy to clean grease filter, a protective lamp lens that distributes light evenly over the cook-top and control switches for fan speed and light activation. Includes built-in 7-Inch duct adapter. Installs as 7-Inch round ducted only. 190 CFM, 6.0 Sones (vertical discharge) performance. HVI 2100 Certified. Dishwasher-safe aluminum grease filter. Accepts up to 75-Watt light (bulb not included). Built-in 7-Inch adapter. BP87 dampers sold separately. This range hood can work in an ADA-compliant application.
From the Manufacturer
The 42000 series offers an effective and durable under-the-cabinet hood solution for vertical discharge installations. The range hood is designed for 7-Inch round vertical duct attachment. The hood comes in a variety of appliance matching colors and widths, and features a fan designed for years of trouble free service, an easy to clean grease filter, an easy to clean grease filter, a protective lamp lens that distributes light evenly over the cook-top and control switches for fan speed and light activation. Includes built-in 7-Inch duct adapter. Installs as 7-Inch round ducted only. 190 CFM, 6.0 Sone (vertical discharge) performance. HVI 2100 Certified. Dishwasher-safe aluminum grease filter. Accepts up to 75-Watt light (bulb not included). Built-in 7-Inch adapter. BP87 dampers sold separately. This range hood can work in an ADA-compliant application.
Conclusion
By our suggestions above, we hope that you can found rv oven hood exhaust vent for you.Please don’t forget to share your experience by comment in this post. Thank you!
