kinsunny 
Nowadays, there are so many products of refrigerator temperature controller dual replacement in the market and you are wondering to choose a best one. You have searched for refrigerator temperature controller dual replacement in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings refrigerator temperature controller dual replacement which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000
bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A
bayite Temperature Controller 1650W BTC211 Digital Outlet Thermostat, Pre-wired, 2 Stage Heating and Cooling Mode, 110V – 240V 15A
Inkbird Dual Stage Temperature Controller + NTC Sensor, AC 100V – AC 240V. (ITC-308S + 1.97" NTC Probe)
- ????????[Convenient Design] Support °F/ °C display. Easy to set, PV and SV dual display windows.
- ????????[Dual Relay Output] You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
- ????????[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- ????????[Waterproof Sensor] The temperature controller sensor is stainless and waterproof IP68.
- ????????[Alarm for Safe] Alarm when over-temperature and sensor error. Maximum output load: 1200W(110V).
Features:
– Plug and play design, easy to use.
– Support reading with Centigrade or Fahrenheit unit.
– Temperature calibration.
– Compressor delay protection for refrigeration control.
– High and low temperature alarms are available.
– Over-temperature and sensor fault alarm.
– Heating/Cooling differential function could be set separately for cooling and heating to protect temperature controller from violent change.
Specification:
Temperature Control Range : -50~99°C / -58~210 °F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Input Power: 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308S Temperature Controller
1x 1.97″ Female to Male NTC Sensor
1x Manual
bayite AC 110V Fahrenheit Digital Temperature Controller 10A 1 Relay with Sensor
- KEEP TEMPERATURE IN DESIRED RANGE: It’s on/off control mode. Turn on your device at a degree and turn it off at another degree. The difference of the 2 degrees can be minimum 1 and maximum 25.
- HEATING OR REFRIGERATION WORKING MODE: Switch between heating mode and refrigeration mode according to the device your need.
- LONG SENSOR CABLE: 3m/9.8ft. Size of the WATERPROOF probe head: 4mm*20mm
- WIDE RANGE OF USES: seedling heat mat, home brewing, aquarium, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, etc.
- With compressor delay protection function for refrigerating control
This is an AC 110V Fahrenheit Digital temperature controller. It can control the power to a freezer to prevent it from getting too cold, or control the power to a terrarium to prevent it from getting too hot, maintain a stable environment.
This controller provides heating and cooling modes and temperature alarm function.
For example:
If you choose heating mode, set control Value to 100°F, set span value to 10°F. The relay will be connected when temp drop to 90°F. The relay will be disconnected when temp reaches 100°F;
If you choose cooling mode, set control Value to 100°F, set span value to 8°F. The relay will be connected when temp reaches 108°F. The relay will be disconnected when temp drops to 100°F
Specification:
1.Power supply for the controller: AC 110V, 50/60Hz
2.Temperature unit: Fahrenheit, Measure range: -4 ~ 220°F
3.Temperature measure resolution: 1
4.Accuracy: ±0.5
5.Working mode: Heating OR Cooling mode
6.Slew range of temp controlling: 1 – 25(Max temp span between ON and OFF)
7.Control resolution: 1(Minimum temp span between ON and OFF)
8.Power consumption: less than 3W
9.Relay contact capacity: 10A/250VAC, 10A/110VAC
10.Data retention: Yes
11.Compressor delay protection: YES
12.Product size:8.5*7.5*3.5cm / 3.4*3*1.4in
13.Sensor Cable length: 3m/9.8ft
Package Content:
1x Digital Temperature controller
Uxcell a15011200ux0343 WPFE24C-L 2P Freezer Refrigerator Temp Switch Temperature Controller AC 250V/125V 6A/8A
Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit ＆ Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (12 Volt)
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50～210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF（-50 oF -160 oF）/ ±1 oC（-50 oC -70 oC） Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC);
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87″ SENSOR
1x Muanal
Refrigeration Thermostat Temperature Controller Thermostat For Refrigerator 250V Replacement
Specification:
Brand new and high quality!
Working Voltage: AC 250V
Current: 4A/5A 50/60Hz
Warm In: -1C to 3C
Warm Out: -7C to -9C
Cold Out: -20C to 25C
Terminals: 2
Dimensions:
Width: 30mm
Wire Length: 850mm
Distance between holes: 55mm
Material: Metal, Plastic
Color: Silver
Package Included:
1 x Refrigerator Thermostat
Note:
1.Please allow 1-3mm error due to manual measurement. Please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.
Inkbird Pre-Wired Digital Dual Stage Temperature Controller Outlet Thermostats 110V 1000W With 12" Stainless Probe Sensor DC Cord for Fermentation Kegerator ect
- 12inch Stainless Probe with 6.5ft DC cord
- Temperature calibration
- Dual relay output, be able to connect with refrigeration and heating equipment at the same time
- Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
- Support reading with Centigrade or Fahrenheit unit
Features:
This temperature probe can be submersed into beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
It’s compatible with INKBIRD’s following controllers:ITC-308,ITC-306T,ITC-310T.
Plug and play design,easy to use;
Dual relay output,be able to connect with refrigeration and heating equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Maximum output load:1100W(110V);
Dual display window,be able to display measured temperature and set temperature at the same time;
Compressor delay protection for refrigeration control
High and low temperature alarms are available;
Specification
Temperature Control Range:-50~99°C/-58~210 °F
Temperature Resolution:0.1°C/0.1°F
Temperature Accuracy:±1°C(-50~70°C)/±1°F(-50~160°F)
Temperature Control Mode:On/Off Control,Heating and Cooling
Input Power:100~240VAC,50Hz/60Hz
Temperature Control Output:Max.10A,100V ~240VAC
Dimension Body:140x68x33mm(5.5×2.7×1.3inch)
Socket:85x42x24mm(3.3×1.7x1inch)
Input Power Cable Length:1.5m(5ft)
Output Power Cable Length:30cm(1ft)
Buzzer Alarm: High and Low Temperature Alarm
Over-temperature and sensor fault alarm
Ambient Temperature:-30~75°C/-22~167°F
Storage Temperature:-20~60°C
Measuring temperature range:-50℃~120℃
Sensor Type: NTC
Probe Material:Stainless steel
Probe Dimensions:6mmx300mm(0.24in x 12in)
Cord Length (excluding probe):2m (6.5ft)
Package Content:
1xITC308S temperature controller;
1xStainless Steel Probe DC Sensor
1xManual
Temperature Thermostat Controller, STC-3008 Digital Dual Display Dual NTC Probe Sensor for Farm Various Refrigerator Greenhouse Aquarium(24V)
- Dual screen dual digital display, clear value display, convenient reading.
- Dual NTC probes are more sensitive and accurate, temperature measurement accuracy is ±1 °C (-50 °C-70 °C).
- Adjustable dual temperature control for easier and more convenient use.
- ABS flame retardant plastic shell, use more safe and assured.
- Used for temperature regulation, farm, various refrigerator, greenhouse, aquarium, etc.
Features:
1. Dual screen dual digital display, clear value display, convenient reading.
2. Dual NTC probes are more sensitive and accurate, temperature measurement accuracy is ±1 °C (-50 °C-70 °C).
3. Adjustable dual temperature control for easier and more convenient use.
4. ABS flame retardant plastic shell, use more safe and assured.
5. Used for temperature regulation, farm, various refrigerator, greenhouse, aquarium, etc.
Specification:
Condition: 100% Brand New
Item Type: Digital Thermostat
Product Model: STC-3008
Temperature Control Range: -55 ° C ~ +110 ° C
Screen Display: Dual Screen Dual Display
Temperature Measurement Accuracy: ±1 °C (-50 °C-70 °C)
Optional Power Supply: DC12V, DC24V, 110-220VAC, (50/60Hz)
Machine Size: Approx. 75 * 34.5 * 85mm / 3 * 1.4 * 3.3in
Sensor: NTC sensor (1 meter)
Installation Opening: Approx. 71 * 29mm / 2.8 * 1.1in
Housing Material: ABS flame retardant plastic shell
Output capacity: 10A
Package List:
1 * Temperature Controller
2 * Probe
Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Conclusion
By our suggestions above, we hope that you can found refrigerator temperature controller dual replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!
