Which Is The Best Microwave Oven Detector

The PMD74 is a microwave leakage detector from Pyle. This device never needs calibration and allows you to accurately and precisely measure the amount of radiation emitting from your microwave. Measures from 0 to 9.99 mw/cm2. The PMD74 will automatically signal a warning beep and LED flash if the detected radiation is above safe levels (5 mw/Cm2). Make sure your microwave is functioning properly and get piece of mind with the PMD74.

Brief Description

This is the most reliable microwave leakage detector. It can be used to verify any leakage from microwave ovens within a few minutes.

It is featured with large LCD and leakage volume in dangerous zones will sound “beeping” and a red flashing lamp. When there is excessive microwave leakage from the microwave ovens, the unit will be automatically alarmed and flash to effectively test the microwave leak. In addition, this microwave leak detector calibrated in the factory and never need recalibration.

Features

-Large LCD digital readout

-Leakage volume in dangerous level will sound “beeping” and red flashing lamp

-Portable design for use in either hand

-Never needs recalibration

-High sensitive

-Excellent reliability and high precision

-Maximum data hold function

Specifications

-Measure range: 0 ~ 9.99mW/cm2

-Warning: 5.0mW/cm2

-Accuracy: ±1db

-Calibration: 2450MHz

-Power supply: 9V battery

-Item Size: approx. 145 (L) x 58 (W) x 35 (D) mm (5.71′ x 2.28′ x 1.38′ inch)

-Item Weight: approx. 120 g (4.23 oz)

One Set Included

-1 x Professional Microwave Leakage Detector

-1 x Instruction Manual

-Standard Factory Package (no box)

Features:

– Ranges: 2.45 GHZ (microwave frequency) or 50MHZ~3.5 GHZ.
– RF power density: 0.01~2.700m W/cm2.
– Data hold (HOLD).
– Maximum (MAX) Hold.
– Minimum (MIN) Hold.
– Zero function.
– Build in alarm setting.
– Low battery indication.
– Overload indication.

Application:

– This meter is applied to measuring electromagnetic fields of 2.45 GHZ (microwave frequency) or normal (50MHZ~3.5 GHZ).
– It is capable of measuring the electromagnetic field radiation intensity that is produced from welding equipment, microwave oven and otherenvironment…etc
– Microwave oven leakage detection.

Specification:

– Display : 3-3/4 digits LCD, maximum reading 3999.
– Resolution : 0.001mW/cm2.
– Frequency response : 50MHz to 3.5 GHz.
– Sensor : Single Axis.
– Accuracy : ±2 dB at 2.45 GHz ± 50MHz.
– Over load : LCD display “OL”.
– Sample rate : 2.5 times per second.
– Battery : 9V NEDA 1604, IEC 6F22 or JIS 006P.
– Battery life : Approximate 100 hours.
– Operating temperature & humidity : 5℃to 40℃,below 80% RH.
– Storage temperature & humidity : -10℃to 60℃, below 70%.
– Weight : About 170g.
– Dimensions : 130(L)*56(W)*38(H) mm.
– Accessories : User’s manual, 9V battery, carrying case.

Product description

Genuine OEM WB27X10461 GE Hotpoint Microwave Range Flame Sensor.The “Flame Sensor” can also be called a “Thermostat” or a “Thermo-Switch”

From the Manufacturer

GE WB27X10461 Flame Sensor for Microwave.

Installation Instructions do NOT accompany this part! This Temperature Sensor Probe shipped with the following LG Over / Ranges: LSE4613ST, LSE4613ST/00, LSE4616ST, LSE4617ST, LSE5613BD This is a true LG Part! This item is NEW! If your Range or Oven is NOT listed above, please send us a message so we may help you obtain the correct part!

Product Description

This is a genuine replacement part. The model number and name for the following item is: Oven Control Board 316207522 Frigidaire circuit board timer

From the Manufacturer

This is a Genuine Replacement Part ,The Model Number and Name for the Following Item:Electrolux (ELEHI) 316207522 Oven Sensor

This is the most reliable microwave leakage detector.
It can be used to verify any leakage from microwave ovens within a few minutes.
It is featured with large LCD and leakage volume in dangerous zones will sound “beeping” and a red flashing lamp.
When there is excessive microwave leakage from the microwave ovens, the unit will be automatically alarmed and flash to effectively test the microwave leak.
In addition, this microwave leak detector calibrated in the factory and never need recalibration.

Features:
– Large LCD digital readout
– Leakage volume in dangerous level will sound “beeping” and red flashing lamp
– Portable design for use in either hand
– Never needs recalibration
– High sensitive
– Excellent reliability and high precision
– Maximum data hold function Specifications
– Measure range: 0 ~ 9.99mW/cm2
– Warning: 5.0mW/cm2
– Accuracy: ¡À1db
– Calibration: 2450MHz
– Power supply: 9V battery
– Item Size: approx. 145 (L) x 58 (W) x 35 (D) mm (5.71′ x 2.28′ x 1.38′ inch)
– Item Weight: approx. 120 g (4.23 oz)

Package Content:
– 1 x Professional Microwave Leakage Detector [9V Battery Included]
– 1 x Instruction Manual
– Standard Factory Package.

Specifications:

B
rand new
Material: Plastic+Metal
Color: As the Picture shown
Size: As the picture shown
Quantity: 1 Pc
Power supply: 12-24V DC
Max load: 7A
Transmission power:<0.2mW
Power consumption(approx.): 0.5W
HF system: 5.8GHz CW radar, ISM band
Installation : Indoors, ceiling mounting
Time setting: 10sec to 30min
Detection angle: 360°
Light control: 2~2000LUX
Reach: 1-10m(radii.), adjustable
Connect N, L with power
Connect N', L with switch signal
The high-frequency output of this sensor is<0.2mW that is just one 5000th of the transmission power of a mobile phone or the output of a microwave oven

Package Included:
1*
Sensor Switch
(Unpacking shipment)

N
ote:
Please allow
minor error due to manual measurement.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Conclusion

By our suggestions above, we hope that you can found microwave oven detector for you.Please don’t forget to share your experience by comment in this post. Thank you!