kinsunny Finding your suitable readers for kegerator dual tap tower is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator dual tap tower including detail information and customer reviews. Let’s find out which is your favorite one.
760 reviews analysed
Kegco D4743DT-SS Double Tap SS Draft Beer Kegerator Tower – 3" Diameter
- Kegco Quality 304 Stainless Steel Beer Tower with Two Chrome Faucets
- 3″ Diameter Premium Quality 304 Stainless Steel Column
- Used with Air Cooled Beer Dispensing Systems
- Two Kegco Chrome-Plated Brass Faucets Installed
- Two 5′ Lengths of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assemblies
This is a Polished Stainless Steel Single Column, Double Faucet, 3″ Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5″ lengths of 3/16″ clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench
- DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
- The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
- USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
- Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
- 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)
- Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
- BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage
- Transparent hose is FDA approved 21CFR 175.300 PVC
- KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink
- Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing
- PACKAGE CONTENTS: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience
- Keg couplers required, not included
BEER TOWER COOLER INSULATOR – EXTRA-THICK (4 mm) NEOPRENE COVER (DARK GREY) FOR DOUBLE-TAP BEER TOWER – EXTRA-WIDE (1.2”) HOOK-&-LOOP FASTENER – FITS TOWERS 3” WIDE 12.5”-13.5” HIGH – BEERGON 2-TAP
- KEEP YOUR BEER ICY-COLD WITH BEERGON DUAL TAP BEER TOWER COVER – Enjoy icy-cold beer right out of the first drop. This beer tower cooling system features EXTRA-THICK (4 millimeters) Neoprene fabric technology for the ultimate insulation and protection of your beer tower.
- BEST INSULATION = NO CONDENSATION! – We know how much you hate that condensation on your beer tower. Not anymore! The heat-proofing that this beer tower accessory provides prevents any condensation. In addition, our beer tower cover protects your tower from splashing beer.
- BEERGON BEER TOWER INSULATOR fits beer towers measuring 3” in diameter with two taps. The cover is made of stretchable fabric and can fit towers measuring 12.5”-13.5” in height.
- EASY TO USE – BEERGON beer tower covering improves and maintains your brewery equipment by keeping it insulated and protected and features an EXTRA-WIDE Hook-&-Loop Strip (1.2” wide) making it more durable so you can take the cover on and off at will.
- OUR SELECTED “CHARCOAL” COLOR makes your tower look great and clean easily – Wipe it with a lightly damp cloth to remove any visible stains so you can enjoy your tower always looking awesome!
BEERGON DOUBLE TAP Beer Tower Insulator is a cover made of EXTRA-THICK (4 mm) Neoprene material for best insulation of your beer tower. This allows you to keep your beer icy-cold from the first drop you pour. This cover is easy to use and features an EXTRA-WIDE Hook-&-Loop fastener (1.2-inch wide) which makes it more durable so you can take it on and off at will. It prevents condensation on your dual tap beer dispenser and importantly it is great for protecting your 2-TAP tower from splashing beer and from scratches. It fits double-tap beer towers of 3” in diameter and 12.5”-13.5” tall as it made of stretchable fabric. Its “charcoal” color is optimized to look great and clean easily – wipe it with a lightly damp cloth to remove any visible stains and enjoy your tower looking awesome! GET YOUR BEERGON BEER TOWER COVER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) cooler insulator for double-tap beer tower (beer tower NOT included)
SPECIFICATIONS:
Cover’s dimension (open, spread out): 12.5” (Height) x 11” (Width)
Fits double-tap beer tower of this dimension: 3” diameter, 12.5”-13.5” tall
Fabric material: 4 mm thick Neoprene
Hook-&-Loop dimension: 1.2” wide, 10” high
Color: Charcoal (dark grey)
DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
SPECIFICATIONS:
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
Kegco 2FT650SS Double Faucet SS Draft Beer Tower with Per Lick 650SS SS Faucets
Kegco D4743T-SS Polished Stainless Steel Single Tap Beer Tower – 3" Column
- A Kegco 3″ Diameter 304 Polished Stainless Steel Air Cooled Beer Column
- Single Kegco Beer Faucet with Chrome-Plated Brass with Brass Lever Installed
- 5′ of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assembly
- Connects to All Standard Keg Couplers
- Mounting Gasket and Screws Included
This is a top-of-the-line single faucet Polished Stainless Steel Draft Beer Tower with a 3″ diameter column. This item is very popular for outdoor or commercial applications. This tower comes complete with a chrome plated faucet and 5 feet of 3/16″ clear beer tubing that ends in a nozzle and hex nut assembly that connects to all standard keg couplers.
Single Tap Chrome Draft Beer Kegerator Tower – 2 1/2" Diameter
Draft beer towers are a simple and economical solution for your home bar. They look great mounted on your bar or countertop and function just like those at your favorite bar. This is a single tap model with a chrome finish (2 1/2-inch diameter). Comes with matching chrome plated faucet with brass lever and black plastic faucet knob (tap handle). In stock and ready to ship. Features: Beautiful chrome finish. Single faucet (included). Includes beer line and fittings. Specs: Dimensions: 2 1/2″ D with 3 1/2″ D base flange and cover 11″ H and 9″ H from counter to bottom of faucet. . Includes: 4′ of beer line with hex nut connectors. Mounting gasket. Chrome plated faucet with brass lever. Black plastic faucet knob (tap handle).
Bev Rite CTT4-186 4 Product Draft Beer Kegerator T Tower, Stainless Steel Body 4 Faucets
Made in USA with High Quality Stainless Steel (#4 polish) box. Has a 3-inch diameter round polished SS Column and flange. Comes with 5′ of beer lines with connections on the ends. Dimensions: Box is 13″ L x 5″ W x 4″ H Column: 10.5″ H Overall height including the box is 14.5″.
Kegco D4740 Single Tap Chrome Draft Beer Kegerator Tower – 2 1/2" Diameter
- Chrome-Plated Metal Single Faucet Beer Tower
- 2-1/2″ Kegco Diameter Air Cooled Chrome Plated Metal Beer Column
- A Single Kegco Chrome-Plated Brass Faucet Installed
- Includes 5′ of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assembly
- Connects to All Standard Keg Couplers
This is a Kegco D4740 commercial grade single faucet chrome-plated metal draft beer tower with a 2-1/2″ diameter column. This is the same tower that is found on all commercial grade kegerators such as True and Beverage Air. This tower comes complete with a chrome plated faucet and 5 feet of 3/16″ clear beer tubing that ends in a nozzle and hex nut assembly that connects to all standard keg couplers.
Conclusion
By our suggestions above, we hope that you can found Kegerator Dual Tap Tower for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Kegerator Dual Tap Tower, eg:
- What are Top 10 Kegerator Dual Tap Tower for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Kegerator Dual Tap Tower to buy?
- What are Top Rated Kegerator Dual Tap Tower to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Kegerator Dual Tap Tower?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Kegerator Dual Tap Tower.
- Before deciding to buy any Kegerator Dual Tap Tower, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Kegerator Dual Tap Tower and What you should consider when buying the Kegerator Dual Tap Tower and Where to Buy or Purchase the Kegerator Dual Tap Tower. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Kegerator Dual Tap Tower of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Kegerator Dual Tap Tower.
