The 10 Best Jeep Grand Cherokee Dash

Metra Radio Installation Kit

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( 175 ), an aftermarket radio install dash kit ( 12 ), wiring harness and a antenna adapter (6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as 3.99 and a Dremel (rotary tool) knock off for 10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit!! Up until now installing an Aftermarket Double Din Radio into a 1999-2001 Jeep Grand Cherokee meant having to take your ride to someone who can custom make a double din kit (these kits cost upwards of $349). However this installation kit allows you to simply modify your preexisting factory dashboard ( reuses your factory a/c vents) to fit a Aftermarket Double Din Radio.***A Soldering Iron, Cordless Drill (with drill bits) and some type of saw for cutting plastic is required for installation. Our Double Din kits are design for use with USA Standard Double Din radio models only that are 180mm x 100mm. Some China radio models will not work with this kit. Please Double Check the size of your aftermarket radio before purchasing this kit. Boss and Eonon radios are notorious for being oversized, please be extremely careful when purchasing these radios.

Since their introduction nearly 8 years ago, our S-Series coaxial have made a name for themselves with avid music fans the world over. So how do you improve on a winner? As the saying goes, if it isn’t broke, don’t fix it!
So we focused on a few key points while leaving the rest intact. The result is our new and improved S-Series coaxials. Without question a fantastic replacement for most OEM speaker applications, the S Series speaker systems continue to offer great performance at a great price.
This year we modified our 2.75" full range speaker to fit many Chrysler and now Ford applications. With so many sizes offered in this coaxial range these speakers make an excellent choice for Autosound enthusiasts who seek true value along with easy installation. We invite you to put our S Series to the test and compare them to speakers priced much higher.
Our proprietary 2-layer paper cone features DDC, allowing you to hear smooth and rich bass all the way through the mid-range tones. For the high frequencies, we feature a low profile, pure silk dome tweeters on most models–like the type used in expensive home systems to make sure you get a complete hi-fi experience.

Features:

Pair PowerBass S-275CF 2.75" OEM Replacement Speakers For Chrysler+Ford Vehicles
Power Handling (RMS/Peak): 30 / 60 watts
Dual Cone Tweeter
2-layer Paper, DDC Cone (Dynamic Damping Coating)
Double Pressed, UV Treated Foam Surround
OEM Drop in Replacement Design
EFF Motor Structures (Efficient Flux Field)
Non-resonant Basket
Size: 2.75"
Nominal Impedance: 4-ohm
Frequency Response: 150Hz-19kHz
Sensitivity (1W / 1M): 90 dB
Magnet Size: 3 oz
Mounting Depth: 1.25"

Single DIN Stereo Dash Kit by Metra. With Trim Plate. Install any single-DIN custom stereo you want in your dash with the help of this premium quality kit. Designed to provide a factory look when complete, the product will match the factory dash contours

– 100% Brand New
– Made of ABS
– Easy installation
– Dashboard Air Condition Vent Trim Ring Outlet Cover
– Fit:For Jeep Grand Cherokee 2014-2018
– Sold in 2pcs/set
– Note:Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
– Warm Tips1:Please check carefully whether this item can fit on your car before purchasing(Especially please check your car model and years)thank you!
– Warm Tips2:When temperature is lower than 15 degrees,please Heat the 3M tape with a hair dryer;please Wipe up need to paste the part.

Up until now installing an Aftermarket Double Din Radio into the 2005-2007 Jeep Grand Cherokee meant having to buy the factory navigation bezel ( $175 ), an aftermarket radio install dash kit ( $12 ), wiring harness and a antenna adapter ($6). However our new kit allows you to replace your Factory Radio with an aftermarket Double Din radio at a reasonable price with a cleaner look. We have taken the extra steps out for buying multiple parts and lowered the price plus you will get a better looking installed with our kit. This wire harness is compatible with standard wiring only. Will not work on models with Factory Infinity Systems, Boston Acoustic Systems or CAN Bus Radios (models REF, REC, RAQ or RAK; The radio’s name can be found on the face of the radio). Installation Directions- Tools needed for install – Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on Amazon. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio.. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel.

2004-2010 Select Chrysler Conversion In-Dash Kit ISO DDIN Radio Provision Painted Matte Black We are the “Installer’s Choice” because we are installers.

Scosche CR1289B 2005-Up Chrysler / Dodge / Jeep Nav Stereo Replacement Kit

Specification:

Composition: 1PC Dashboard cover

Made: Made in China

Material: High Quality Polyester

Made in an ISO 9001 facility to ensure good quality

Easy installed and No modification needed

Color : Black

Feature:

Contours to fit dashboard

Will not shrink, fade or distort

Protects dashboard from UV rays

Eliminates cracking

Reduces glare

UV stabilised high grade polyester auto fabric

Breathes to dissipate heat

Large vent cut-outs so as not to restrict demister airflow

Fitment:

For JEEP GRAND CHEROKEE 2011-2018

Package included:

1* Dashboard Mat

Attention:

1.Different car for different dash mats, please check your car model, years, to make sure the mat fits

your car correctly.

2.The mat only fits for left-hand drive car,if your car is RIGHT-HAND, please contact with us before bidding, will customize it for you.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Jeep Grand Cherokee Dash, eg:

• What are Top 10 Jeep Grand Cherokee Dash for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Jeep Grand Cherokee Dash to buy?
• What are Top Rated Jeep Grand Cherokee Dash to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Jeep Grand Cherokee Dash?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Jeep Grand Cherokee Dash.
• Before deciding to buy any Jeep Grand Cherokee Dash, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Jeep Grand Cherokee Dash and What you should consider when buying the Jeep Grand Cherokee Dash and Where to Buy or Purchase the Jeep Grand Cherokee Dash. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Jeep Grand Cherokee Dash of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Jeep Grand Cherokee Dash.