Which Is The Best Hot Water Potable Circulation Pump

Product Details
Model: RS15-6
Rated Power: 93/67/46W 
Outlet: 3/4 inch 
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz

Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on

Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control

Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm

Product Description

Specification:

• Voltage: 120 volts
• Item Weight: 8.5 pounds
• Overall Dimension: 6.2 x 6 x 5 inches
• Size: Full
• Color: Blue
• Material: Case
• Warranty: 1 Year

Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz

Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.

Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.

Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.

Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.

Product Description

Up1510su7ptlc features: -Recirculator pump kit.-Material: Bronze and stainless steel.-Aluminum stator housing.-Stainless steel spherical separator.-Stainless steel / tungsten carbide rotor.-Stainless steel, epdm, pu, ptfe, graphite rotor and impeller.-Brass ms 58 pump housing.-Ppo isolation valve.-Pa66/6 terminal box cover, motor cover.-Lexan light.-Pvc cable, cable relief.-Epp 55 insulating cover.-Epdm o’rings.-Pom check valve.-Proud to bring the comfort and savings of hot water recirculation to the existing homes market with the comfort series instant hot water system.-Stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater.-Comfort valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater.-Circulator pumps, series up, are specifically designed for heating systems.-Suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.-Wet rotor design.-Composite impeller.-Eliminates and prevents corrosive effects of fresh water.-Maintenance-free, low energy consumption, easy to install, quiet running.-Improved performance and efficiency.-Pre-program usage times to save power.-No additional wiring required.-Adds to savings by operating pump by sensing the water temperature.-Insulation class: F.-Flow range: 0 – 65 us gpm.-Head range: 0” – 72”.-Maximum fluid temperature: 150 f (66 c).-Minimum fluid temperature: 36 f (2 c).-Maximum working pressure: 145 psi.-Connection: 075” m x 075” fnpt.-Tlc : Timer, line cord. Includes: -Includes timer and line cord.-Comfort system includes a up15-10su7/tlc circulator and the revolutionary comfort valve. Specifications: -Up15-10su7p/tlc comfort series 1/25 hp recirculator.-Recirculator engine: 1/25 hp.-Power consumption: 25watts.-Motors: Voltage: 115volts, phase: 1. Dimensions: -Dimension.

From the Manufacturer

The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.

Product Description

The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by ceramic shaft and radial bearings, carbon axial bearing, stainless steel rotor can and bearing plate, corrosion-resistant impeller, composite, PES, and cast iron pump housing. The motor is a 1-phase motor. No additional motor protection is required.

From the Manufacturer

Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market. Pump’s performance parameters cover nearly all traditional heating applications – from radiant and baseboards, to fan coils and zoning and many others. 3 speeds allow to set up the circulator pump in a way, that matches the system’s requirements, while wet rotor design allows it to be virtually silent while operating.

Conclusion

By our suggestions above, we hope that you can found hot water potable circulation pump for you.Please don’t forget to share your experience by comment in this post. Thank you!