kinsunny 
Nowadays, there are so many products of fan thermostat temperature switch engine cooling sensor relay kit in the market and you are wondering to choose a best one. You have searched for fan thermostat temperature switch engine cooling sensor relay kit in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings fan thermostat temperature switch engine cooling sensor relay kit which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
PartsSquare 175-185 Degree Electric Cooling Fan Thermostat Kit Temp Sensor Temperature Switch 40 50 60 amp RELAY KIT
- Replacement for : 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- New 175 – 185 degree electric fan thermostat relay switch kit for your cooling system, It is a 3/8″ pipe thread.
- This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system.
- High Quality Replacement Part, have no-worry 12 months warranty.
175-185 Degree Electric Cooling Fan Thermostat Kit Temperature Sensor Temperature Switch 40 50 60 AMP Relay Kit
- 【COMPATIBLE VEHICLES】 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- 【DIRECT FIT & EASY INSTALLATION】This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- 【Premium Quality】New 175-185 degree electric fan thermostat relay switch kit for your cooling system, sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V.
- 【WORKING】This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system.
- 【NOTE】If you get any problems with our this Electric Cooling Fan Thermostat Kit, please contact us in the first time, we will response within 12 working hours.
faersi 185-200 Degree Electric Cooling Fan Thermostat Kit Temperature Sensor Temperature Switch 50 60 AMP Relay Kit
- 【COMPATIBLE VEHICLES】 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- 【DIRECT FIT & EASY INSTALLATION】This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- 【Premium Quality】New 185-200 degree electric fan thermostat relay switch kit for your cooling system, sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V.
- 【WORKING】This kit is set up to turn your electric fan on at 200 degrees and shut off at 185 degrees and will work with any 12 volt system.
- 【NOTE】If you get any problems with our this Electric Cooling Fan Thermostat Kit, please contact us in the first time, we will response within 12 working hours.
Fan Thermostat Temperature Switch with 3/8" Pipe Thread, 185 to 175 Degree Electric Engine Cooling Fan Thermostat Temperature Sensor Switch, Fits 10" 12" 14" 16" Fan (With Pipe Thread)
- [Ease of use]: Direct replacement part for original blower motor resistor, perfect fits for any of 10, 12, 14, and 16 inch fans including dual fans
- [High-efficiency Fan Thermostat Temperature Switch]: Turns your electric engine cooling fan on at 185 degree and off at 175 degree
- [Fits most engines]: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
- [Strong & rust-free metal]: Crafted with high quality steel, come with hexagonal nut, sending Unit Thread Size: 3/8 inch
- Spanner Size
- 17. Dimensions: Approx. 6 x 2.5cm
- [What You Get]: Yosoo fan thermostat temperature switch, Yosoo worry free guarantee and friendly customer service
Features:
Color: Gold
Material: Aluminum
Fitment:
Fits 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
This kit is perfect for any of our 10, 12, 14, and 16 inch fans
Note:
Please check your part number and make sure the right size before purchase!
Pacakge Includes:
1 x Fan Thermostat Temperature Switch with Hexagonal Nut
185~200 Degree Engine Cooling Fan Thermostat Temperature Switch Sensor Relay Kit
- New 5 Pins 185~200 degree electric fan thermostat relay switch kit, It is a 3/8″ pipe thread.
- This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- Replacement for : 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- This kit is set up to turn your electric fan on at 185 degrees and shut off at 185 degrees and will work with any 12 volt system.
- High Quality Replacement Part, have no-worry 12 months warranty.
Specification:
-Voltage: 12V DC
-Material: Plastic and Metal
-Package Box Size: 13.5 x 9.5 x 7.5cm (L x W x H)
-Quantity: Pack of One Set
Fitment:
Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 Engines
Fit for 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines
Installation Guideline:
1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don’t use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source.
This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
7. Avoid sprinkling water on surrounding auto parts during the installation.
PLEASE NOTICE:
-Please check the compatiblity to make sure correct fitment before purchase.
-Please allow 0.1-0.5cm difference due to manual measurement.
Package Includes:1 Set Cooling Fan Thermostat kit
PartsSquare New 185 Degree On 170 Degree Off Radiator Cooling fan Thermostat Temperature Switch Kit Compatible with 265 283 305 400 347 352 360 390351M 400M 273 318 340 360 361 383 400 ENGINES
- It is a 3/8″ pipe thread. It activates your fan when the temperature reaches 185 degrees and turns off at approximately 170 degrees. This kit is perfect for any of our 10, 12, 14, and 16 inch fans, as well as our dual fans.
- FITS for: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 ENGINES
- Package include: 1 pcs xFan Thermostat Temperature Switch
- Not remanufactured or rebuilt. High Quality Replacement Part.
- High Quality Replacement Part, have no-worry 12 months warranty.
Universal 175-185 Degree Radiator Cooling Fan Thermostat Temperature Switch 40A Relay Kit
- Designed to turn on at 185 degrees and off at 175 degrees.
- Sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V
- Includes a brass adapter to install the sending unit, wires, relay switch, circut breaker.Everything you need to install in your fan .
- Fitment: any size fan(7 inch ,10 inch ,12 inch,14 inch,16 inch)
- Warranty:1 year
AUTEX NEW Dual Electric Cooling Fan 185 Degree On 165 Off Engine Fan Thermostat Temperature Switch 40/50 amp Relay Kit
- Designed to turn on at 185 degrees and off at 165 degrees, it is a 3/8″ pipe thread.
- 50 AMP Relay with 12FT of wiring included.
- Replacement for : Dual and Single 8″ 10″ 12″ 14″ 16″ Fans ( Two 16 inch fans, need 2 Relay Kits )
- This kit includes everything you’ll need to hook up to your fan, includes a brass adapter to install the sending unit, wires, relay switch, circut breaker, terminals and mounting screws.
- High Quality Replacement Part, have no-worry 12 months warranty.
Amazingli 175 to 185 Degree Cooling Fan Thermostat Kit Temp Sensor Temperature Switch 40 AMP Relay Kit
- Sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V
- 175 – 185 degree electric fan thermostat relay switch kit for your cooling system
- Includes a brass adapter to install the sending unit, wires, relay switch, circut breaker
- Helps to set up to turn your electric fan on at 185 degrees and shut off at 175 degrees, can work with any 12 volt system
- Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
Product Details:
— 100% brand new with high quality, durable to use.
— Material: Plastic and Metal
— Cable Length: approx. 165cm
— Voltage: 12V DC
Fitment:
Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 Engines
Fit for 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines
Installation Guideline:
1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don’t use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
PLEASE NOTICE:
— Please check the compatiblity to make sure correct fitment before purchase.
— Please allow 0.1-0.5cm difference due to manual measurement.
Package Includes:
1 Set Cooling Fan Thermostat kit
Conclusion
By our suggestions above, we hope that you can found fan thermostat temperature switch engine cooling sensor relay kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
