Which Is The Best Energy Smart Hot Water Heater Control

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLY SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 120°F @ 1GPM

Max. Amperage: 23A

Recommended wire size: 12AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual and warranty card

1X Installation accessories

1X Remote control(for Black model)

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Product Description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with (1) 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

+++AS ADVERTISED ON TV+++SAME DAY SHIPPING+++ +++ R-Value 7.1+++Reduce Heat Loss by 40 %+++BEST QUALITY, MORE SAVINGS+++DON’T BUY CHEAP, BUY THE BEST, SAVE 2x MORE+++ Kit Content: 2 pcs Aluminum Foil insulation L-84″x W-24″/1pc Aluminum Foil insulation L-84″x W-15-1/2″, 1 pc Aluminum Foil insulation D-30″ (top-lid) / 1 unit 2″ Aluminum Foil tape 30 LNFT. Water Heater is one of the most important appliances, but it’s also the third largest energy expense in your home, representing 13% of your utility bills. By insulating the whole water heater unit with SmartJACKET, you will improve your water heaters efficiency (40%) by keeping the water it has already heated, hot. PLEASE SEE THE INSTALLATION VIDEO: http://www.youtube.com/watch?v=G13KGIFHac4 PLEASE CHECK OUR ATTIC INSULATION SmartAttic: http://www.amazon.com/gp/product/B00Q06UVUW PLEASE CHECK OUR GARAGE DOOR INSULATION SmartGarage: http://www.amazon.com/SmartGarage-Reflective-Insulation-Fiberglass-Satisfaction/dp/B006UF7MCS/ref=sr_1_1?s=hi&ie=UTF8&qid=1416677734&sr=1-1&keywords=garage+insulation+smartgarage

Product Description

The Bosch US7 Tronic 3000 electric tankless water heater is designed to provide an endless supply of hot water to kitchen, bathroom, and handwashing sinks. This 7.2 kW electric heater eliminates long waits for hot water by using a dual chambered copper heat exchanger. The unit runs at 98% thermal efficiency, so stand-by loss is therefore minimal. Plus, it mounts on the wall in any direction and is compact and lightweight, making it a great choice for a variety of spaces. This item requires professional installation and hardwiring. With its top performance specifications and versatility, the US7 Tronic 3000 is a great way to get the hot water going in kitchens, offices, at warehouses, service stations, stores, and concession stands.

From the Manufacturer

Ultra compact and lightweight, these five point-of-use / under-sink tankless water heaters were designed to provide an endless supply of hot water for 1 kitchen and / or bathroom sink at a time in commercial, industrial, and residential applications. Advantages include 98 % efficiency with minimal stand-by loss. Most models come equipped with high / low kW settings and universal horizontal / vertical mounting options.

Conclusion

By our suggestions above, we hope that you can found energy smart hot water heater control for you.Please don’t forget to share your experience by comment in this post. Thank you!