kinsunny 
Nowadays, there are so many products of cooling system parts in the market and you are wondering to choose a best one. You have searched for cooling system parts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling system parts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Cooling System Service Kit for BMW 3-Series 1999-2006 Set of 6 w/Fan Clutch Fan Blade Water Pump Thermostat Coolant Reservoir and Cap
Evan-Fischer Cooling System Service Kit
Included parts:
- Fan Clutch
- Fan Blade
- Coolant Reservoir
- Coolant Reservoir Cap
- Water Pump
- Thermostat
This Evan-Fischer Cooling System Service Kit replaces your failed stock unit.
- Affordable replacement for broken or damaged part
- Comes with 1-year unlimited mileage warranty
Stant 12555 Leather Cup for (12270) Cooling System Tester
Stant’s Cooling System Tester tests up to 30 pound cooling systems and pressure caps part number 12270. It lets you test todays vehicles higher pressure cooling systems and caps. The genuine Stant repair parts let you repair your tester for years of productive use. The quality parts are made specifically for Stant tester and are available individually for your convenience.
Stant 12553 Check Valve for (12270) Cooling System Tester
Stant’s Cooling System Tester tests up to 30 pound cooling systems and pressure caps part number 12270. It lets you test todays vehicles higher pressure cooling systems and caps. The genuine Stant repair parts let you repair your tester for years of productive use. The quality parts are made specifically for Stant tester and are available individually for your convenience.
Stant 10047 Cooling System Pressure Tester Adapter Kit
- Cooling system pressure tester adapter set Includes adapters needed to adapt test equipment to radiator caps and cooling systems
- Adapter set is for use on various vehicles, including, but not limited to: GM cars and trucks, Ford cars and trucks, select kenworth, freightliner, IHC, Navistar, Volvo and Sterling trucks
- Includes 1 each of the following adapters: 12015, 12026, 12029, 12032, 12033, 12042, and 12450
- Adapters feature metal and/or plastic Construction (depending on adapter)
- The Stant coolant system pressure tester kit uses specially engineered testing equipment that can help determine the health of cooling system components like: radiators, caps, and Hoses
Cooling system pressure tester adapter set includes adapters needed to adapt test equipment to radiator caps and cooling systems. Each set contains multiple adapters that fit either a specific make or a number of makes. Adapters are for use with the Stant cooling system pressure tester kit. Adapters are crafted from durable plastics and/or metal – tough enough to hold up to years of heavy use. Stant is a world leader in the development and manufacture of fuel and cooling system products. Founded in connersville, INDIANA by George Stant in 1898, today the company is still based in connersville, but is now owned by high capital LLC. Stant designs and produces a variety of consumer products including thermostats, radiator and coolant reservoir caps. The majority of Stant consumer products are manufactured in the USA in TS16949/ISO14001 certified facilities.
Stant 12032 Threaded Radiator Cooling System Tester Adapter
12032 threaded cap testing adapter is required to test many 1999 and newer GM cooling systems with a threaded filler neck
TYC 623430 BMW Replacement Cooling Fan Assembly
TYC cooling fan assemblies are designed to be comparable to OE in performance, validated through air volume test that simulates cooling ability. Each unit is an assembly with motor, fan, and shroud to simplify replacement compared to working on individual components. To ensure durability, each cooling fan design are run through tests like : corrosion resistance, endurance, moisture, torsion and, vibration. Each unit goes through a quick power-on test before leaving the factory to ensure functionality.
Flex-a-lite 420 Lo-Profile S-Blade Dual Electric Puller Fan
- Overall dimensions of 26 1/4″ x 15 1/2″ x 2 5/8″
- Flows 2,500 cfm (cubic feet per minute) at 22 amps of current draw
- S-blade design offers quieter operation than traditional straight blades
- One year manufacturer warranty
- Facilitates hassle-free installation and features universal application
The Flex-a-lite Lo-Profile S-Blade Dual Electric Puller Fan is designed to offer optimum cooling for situations where clearance is an issue. At just 2 5/8” thick, it is one of the lowest profile fans of its kind on the market.
Omix-ADA 17118.21 Cooling System Kit for Jeep CJ (4.2L)
Omix-ADA Cooling System Kits offer you the exact parts you need to keep your Jeeps cooling system operating at its best. When you are ready to service your cooling system, just drain the old coolant, install the components in our Cooling System Kit and refill the system. Since all of our parts are engineered to meet or exceed OE quality standards, you’ll be running cooler knowing that you did the job right. Each kit includes the correct NEW upper and lower radiator hoses, NEW thermostat housing, 195 degree thermostat, gasket and four radiator hose clamps.
Terisass Metal Auto Parts Radiator Pressure Tester and Vacuum Type Cooling System Kit for Car SUV Van Cooler
- ①【Content】The cooling system kit includes flexible hoses for connections that are difficult to connect. The pressure gauge has a rubber boot and a pressure relief valve. It includes a universal cooler for radiators in most cars, SUVs and light trucks.
- ②【High Performance】Use the Coolant Quick Add Tool to quickly refill the entire cooling system without air bubbles. Reducing the refilling time of the cooling system does not cause confusion or introduce air locks.
- ③【Function】The cooling system kit can perform airless filling of the cooling system while checking the tension. The kit eliminates air pockets without the need for an exhaust and cleaning system. It is easily connected to the shop air and creates a vacuum to remove residual air from the cooling system.
- ④【Easy to Install】The vacuum cleaning tool is easy to assemble and use, with easy-to-read instructions and diagrams. The sturdy plastic case is easy to transport, simple to store and fast to identify.
- ⑤【Customer Service】 If you have any doubts or dissatisfaction with this cooling system kit, please contact us in time, our experienced customer service will try our best to reply you within 24 hours.
Specifications:
Condition: 100% brand new
Material: plastic, metal, rubber
Color: shown as picture
Case Color: red
Size: shown as picture
Fluid Hose Length: approx.147cm / 57.9″(thick one), 75cm / 29.5″(thin one)
Air Pressure: 90 PSI
Air Consumption: 12 cfm
Air Inlet Size: 1/4 BSP
Package Weight: approx.1700g
Instructions for use:
1. Empty all the water in the water tank
2. Open the car hood and hang the hook in the appropriate position
3. Connect the universal rubber joint to the water tank
4. Make sure all switches are closed. Connect the thin tube to the rat tail interface.
5. Connect the intake pipe Press the yellow switch button to open the air inlet switch for vacuuming. When the pressure reaches -20~-25Inhg (-50~-60cmhg), turn off the NO.3 switch.
6. Connect the antifreeze hose to the watch body, and put the other end into the antifreeze container. The interface must be completely submerged below the water level. Open the water inlet switch and the antifreeze solution is automatically replenished to the water tank.
Package List:
1 * Vacuum Purge & Refill Tool
1 * Universal Adaptor
2 * Coolant Hoses
1 * Stainless Hook
1 * Instruction
Stant 12450 Cooling System Tester Adapter
WY12450 Features: -(1) 7/8″ plug #12451 (A 450 1). -Fits all popular trucks with the larger diameter (2-11/16″ O.D “B” size) filler neck. -Truck Radiator Adapter Set. -Includes 2 solid die-cast chrome plated cap and radiator adapters. Product Type: -Mister Nozzles. Dimensions: Overall Height – Top to Bottom: -4 Inches. Overall Width – Side to Side: -5.4 Inches. Overall Depth – Front to Back: -6.6 Inches. Overall Product Weight: -1.3 Pounds.
Conclusion
By our suggestions above, we hope that you can found cooling system parts for you.Please don’t forget to share your experience by comment in this post. Thank you!
