kinsunny Nowadays, there are so many products of aprilaire 550 solenoid valve in the market and you are wondering to choose a best one.You have searched for aprilaire 550 solenoid valve in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings aprilaire 550 solenoid valve which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
769 reviews analysed
Aprilaire 4040 Solenoid Valve, 24 Volt
- Genuine Aprilaire humidifier replacement part
- Ensures that the right amount of humidity is delivered into your home
- Controls how much moisture enters your humidifier, making it possible to maintain proper humidity levels throughout your home
- Compatible with all Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
Proper humidification of your home is important for protecting your family’s health and the beauty of your home. The 4040 24 Volt Solenoid Valve controls the amount of water that enters your humidifier, ensuring that the right amount of humidity is delivered into the air every time it turns on. Usually installed by your contractor, the solenoid valve is part of the core of your humidifier, making it possible for you to adjust moisture levels with precision and accuracy.
Mudder B2015-S85 B2017-S85 4040 Solenoid Valve Humidifier Valve Compatible with Aprilaire Humidifier 220 224 400 440 500 550 558 560 600 700 24 Volt 2.3 Watts 60 Hz
- Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn’t work on models 330, 445, 110, 112, 350 and 360
- Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home
- Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers
- Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool
- Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time
- Note: please check the relevant size information carefully before purchasing
Note:
The brand we mentioned is only to illustrate the suitability of the product, not as a trademark.
Wide application:
The solenoid valve is compatible with Aprilaire models, such as 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn’t work on models 330, 445, 110, 112, 350 and 360.
Installation steps:
Firstly, disconnect the humidifier and shut off the water supply to the unit.
Secondly, remove the solenoid. Unclip the wires from the solenoid. Using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let remaining water drain into the plastic container. Disconnect the water supply. Use a screwdriver to unscrew the screws and discard the old.
Thirdly, install the solenoid. Align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut.
Finally, connect the wires to the solenoid and reconnect the humidifier.
Specification:
Model No.: B2015-S85/ B2017-S85
Watts: 2.3 watts
PSI: 125
Volt: 24 V
Orifice: 3/32 inch, 1/4 inch
Material: brass and copper wire
Package includes:
1 x Humidifier valve
ALPINE HARDWARE 4040 Replacement Humidifier Valve for Whole House Humidifiers Compare to Part No. 4040 | 24 Volts | 2.3 Watts | 60 HZ
- The 4040 by Alpine Hardware is a replacement humidifier solenoid valve.
- For Whole House Humidifiers 24 volts | 2.3 Watts | 60 Hz
- The humidifier valve includes compression nut, washer and strainer.
- This valve is comparable to part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
- Does not work on models 330, 445, 110, 112, 350 and 360.
Humidifier Valve 4040 Solenoid Valve Brass Air Valve Compatible with Aprilaire Fit for 400 500 600 700 Humidifier 24 Volt
- Application: the 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360
- Function: the humidifier solenoid valve can control how much moisture enters into your humidifier to make it possible to maintain proper humidity levels throughout your home
- Replace numbers: 332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3
- Easy to apply: the installation of the solenoid valve is very easy, just using a screwdriver and wrench can accomplish and it only takes few minutes to install it
- Durable material: the humidifier is made of durable brass material and copper wires, which can serve for long time usage, you can apply it for a long period
Features:
Application:
The 4040 solenoid valve is compatible with majority Aprilaire humidifiers except for commercial units and residential models 800, 330, 445, 110, 112, 350 and 360.
Replace numbers:
332226, 59000, 4040, 40-40, 52P90, 5900063, 5F-D1RA-Q1OQ, 683786072210, 686720404016, APR4040, B00HSFN1RY, B00V8CFBPS, B018HBRMKO, CI4040, GA4040 and O1-UGBC-FCJ3.
Installation steps:
Step 1: disconnect the humidifier: shut off the water supply to the unit.
Step 2: remove the solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube, then let any remaining water drain into the plastic container, disconnect the water supply, use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws, then connect the water supply line, replace the distributor tube and tighten the compression nut, finally connect the wires to the solenoid.
Step 4: reconnect the humidifier.
Specification:
Material: brass and copper wire
Model number: 4040
Watts: 2.3
Orifice: 3/ 64
Volt: 24/ 60V
MOPO: 125
Package quantity:
1 x 4040 Solenoid valve
Note:
All the brand names and models mentioned are not applied as trade marks, just work as product adaptability.
3/4″ Brass Electric Solenoid Valve 24VDC N.C. Air Water Fuel VITON
- Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects.
- This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants.
- This highly responsive valve will open and close in less than 1 second when actuated
- meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance.
- PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle
- to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves.
- As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it.
U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4″) female threaded (NPT) connections, and heat and oil resistant Viton gasket.
Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20="" cst),="" oils="" and="" hydrocarbons,="" gasoline,="" kerosene,="" or="" diesel="" fuel.="">
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or home brewing.
Brand: U.S. Solid
Model: USS2-00061
Size: 3/4″
Flow Aperture: 20 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Rated voltage: DC 24 V, ± 10%
Current: 0.833 A
Power rating: 20 W
Operation Type: Semi-direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 7.6 Cv
Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius)
Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Quality assurance: CE Certified
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
4040 Solenoid Valve, Compatible with Aprilaire Humidifier Solenoid Valve 400, 500, 600, 700, Replaces B2015-S85 B2017-S85, | 24 Volts | 2.3 Watts | 60 HZ
- [ HIGH QUALITY ]–The humidifier valve replacement for 4040 Blue Solenoid Valve. Comes with compression nut, washer, and strainer. The solenoid valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time.
- [ FITS MODELS ] — The 4040solenoid valve is compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768. Does not work on models 330, 445, 110, 112, 350 and 360.
- [ SOLENOID VALVE FEATURES ] — Applicable voltage is 24 volts, the power is 2.3 watts, frequency is 60 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers.
- [ EASY TO INSTALL ] — The installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes.
- [ AFTER-SALES GUARANTEE ] — 100% refund guarantee – any reason you’re not completely satisfied, you can ask for a replacement or full refund, no questions asked.
Humidifier Water Valve for Aprilaire 4040 Solenoid Valve 24 Volt Humidifier Models 400, 500, 600, 700, Part No. B2015-S85
- The 4040 by Eagleggo is a replacement humidifier solenoid valve.
- For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
- The humidifier valve includes compression nut, washer and inline strainer.
- This valve is comparable to Aprilair part # 4040 Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
- Does not work on models 330, 445, 110, 112, 350 and 360.
About:
The 4040 by Eagleggo is a replacement humidifier solenoid valve manufactured for all humidifiers except residential models 110, 112, 330, 350, 360, 445, 800, and commercial models. The solenoid valve turns water on and off to your humidifier but does not regulate volume which is done by a different part called an orifice. Contains pre-installed strainer in the inlet side of the valve for capturing clogging elements in the water such as dirt and sand. Uses pre-existing compression fitting on the outlet side. Electrically operated and uses 24 volts and 2.3 watts. Manufacturer of this valve recommends that any wiring on your humidifier be completed by a professional contractor.
Specifications:
Volts: 24/60
Watts: 2.3
MOPD: 125
Orifice: 3/32
-Both the inlet and outlet are threaded 7/16″-24 UNS for accepting a compression fitting for ¼” tubing.
-Includes compression nut, washer and inline strainer.
-The inlet includes the compression fitting & ferrule.
-For the outlet, your existing compression fitting is reused.
-NOTE: Manufacture recommends that any electrical work with your humidifier be completed by a professional contractor.
Correct/Incorrect Models:
Fits models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768.
Does not work on models 330, 445, 110, 112, 350 and 360.
For Aprilaire Humidifiers | Part No. B2015-S85 | B2017-S85 | 24 volts | 2.3 Watts | 60 Hz
Aprilaire 4793 Maintenance Kit for #550
A2012-S150 Solenoid Valve Humidifier Replacement Valve Compatible with Aprilaire 110, 112, 220, 224, 350, 360, 440 Replace for B2035-S2 B2035-S5 B2035-S54, 24 V, 60 Hz AC, 125 PSI
- Compatible with: the A2012-S150 solenoid valve is compatible with Aprilaire of many models, such as 110, 112, 220, 224, 350, 360, 440, 550, 550A, 550-A, 558, 560, 560A, 560-A, 568, 600, 700, 760, 760A, 760-A, and 768, a practical product for you
- Replacement part number: this humidifier valve can replace part number of A2012-S118, B2035-S2, B2035-S5, B2035-S54, B2035-S55, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S68, B2015-S85 and B2015-S87
- Product function: the humidifier solenoid valve can control the amount of moisture that enters into your humidifier, making it possible to maintain proper humidity levels throughout your home, the voltage is 24 V, the frequency is 50/ 60 Hz and the pressure is 125 PSI
- Easy to install: firstly, disconnect the humidifier, secondly, remove the old solenoid, then, install the new solenoid, finally, reconnect the humidifier, installing only need a screwdriver and wrench, taking just some minutes to finish 4 easy steps
- Material: this solenoid valve is made of brass material and copper wires, durable and sturdy, providing a long service time
Widely applied:
Compatible with Aprilaire humidifiers models of 110, 112, 220, 224, 350, 360, 440, 550, 550A, 550-A, 558, 560, 560A, 560-A, 568, 600, 700, 760, 760A, 760-A and 768.
Replace number of A2012-S118, B2035-S2, B2035-S5, B2035-S54, B2035-S55, B2015-S51, B2015-S54, B2015-S58, B2015-S65, B2015-S68, B2015-S85 and B2015-S87.
How to install:
Step 1: disconnect the humidifier, shut off the water supply to the unit.
Step 2: remove the old solenoid: unclip the wires from the solenoid, using the adjustable wrench to unscrew the compression nut and then remove the distributor and tube. Let any remaining water drain into the plastic container. Disconnect the water supply and use a screwdriver to unscrew the screws and discard the old solenoid.
Step 3: install the solenoid: align the new solenoid and then tighten the screws. Connect the water supply line. Replace the distributor tube and tighten the compression nut. Finally connect the wires to the solenoid.
Step 4: reconnect the humidifier
Specifications:
Model No.: A2012-S150
Pressure: 125 PSI
Volt: 24 VAC
Frequency: 50/60 Hz
Material: brass and copper wire
Package includes:
1 x A2012-S150 solenoid valve
Conclusion
By our suggestions above, we hope that you can found Aprilaire 550 Solenoid Valve for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Aprilaire 550 Solenoid Valve, eg:
- What are Top 10 Aprilaire 550 Solenoid Valve for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Aprilaire 550 Solenoid Valve to buy?
- What are Top Rated Aprilaire 550 Solenoid Valve to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Aprilaire 550 Solenoid Valve?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Aprilaire 550 Solenoid Valve.
- Before deciding to buy any Aprilaire 550 Solenoid Valve, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Aprilaire 550 Solenoid Valve and What you should consider when buying the Aprilaire 550 Solenoid Valve and Where to Buy or Purchase the Aprilaire 550 Solenoid Valve. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Aprilaire 550 Solenoid Valve of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Aprilaire 550 Solenoid Valve.
