The 5 Best Ninja Shp Regulator 4500 Input W1100 Psi Output

IORMAN Universal 4500PSI Paintball Air Tank Regulator, 5/8″-18UNF Inlet Thread Size, G1/2-14 Outlet Thread Size, Comes with Standard 8mm Male Quick Disconnect Foster Fitting Adapter.

Output Pressures:
Standard: Adjustable (450 to 800 psi)
SHP: Adjustable (1100 to 950 psi)
SLP: 300 psi

High quality replacement regulator from Ninja Paintball offers a fast
refill rate with adjustable output pressure. They are set at 800psi from
the factory. Standard regs include a steel bonnet and standard size gauge.
Regulator replacement should only be done by a qualified Airsmith. Please
contact your local paintball shop or Ninjapaintball.com for installation.
Features: For 3K (3000 psi) Bottles only Adjustable Ouput Pressure Steel
Bonnet Standard Gauge

WARNING: THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. WASH HANDS AFTER HANDLING. You can use this low-pressure regulator on any CO2 tank with a CGA-320 valve. CO2 tanks have a male thread (CGA-320); these regulators have a female thread. This regulator features dual gauges to measure psi as well as the volume of CO2 in the cylinder, indicating how much CO2 is left in the cylinder and when you should have it refilled. The knob on the front is used to adjust the output pressure. The red polycarbonate bonnet will not chip, break or fade. There is a non-adjustable shut down built into the body of the regulator. The high-pressure ports have left-hand female threads to prevent their use as a low-pressure outlet. The non-removable adjusting screw is designed so that when it is turned all the way in the maximum downstream delivery pressure will not exceed 50psi, with a safety blow off at 60psi. Internal relief valve opens whenever delivery pressure exceeds set pressure by 15psi. This feature serves as a warning that the seat or diaphragm may be worn or damaged and should be replaced. Sintered metal flow control filter in the inlet nipple to prevent dirt and other particles from damaging internal regulator parts. The permanent Quad-Ring Seal on the inlet nipple helps eliminate a source of leaks, so there is no need to use a new fiber washer each time the tank is changed. Outlet features NADS 1600C shutoff which eliminates a source of gas leaks. The duck bill check valve helps prevent product back up into the regulator, a common cause of malfunction in the regulating and relief valve parts. Hose barb end designed for use with 5/16 inch I.D. pressure tubing. All regulators are pressure tested to assure in-field reliability. The seat assembly is easily replaceable, so there is no need to remove the regulator from the tank. Bullets change to: Low pressure gauge (the top gauge) indicates output pressure to the keg The low pressure regulator allows for an adjusted pressure from 1 to 50psi, the maximum downstream delivery pressure will not exceed 50psi High pressure gauge (the side gauge) indicates CO2 tank pressure remaining Duck bill check valve helps prevent product back up into the regulator Assembled and Tested in the USA

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy ninja shp regulator 4500 input w/1100 psi output, eg:

• What are Top 10 ninja shp regulator 4500 input w/1100 psi output for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 ninja shp regulator 4500 input w/1100 psi output to buy?
• What are Top Rated ninja shp regulator 4500 input w/1100 psi output to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja shp regulator 4500 input w/1100 psi output?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja shp regulator 4500 input w/1100 psi output.
• Before deciding to buy any ninja shp regulator 4500 input w/1100 psi output, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose ninja shp regulator 4500 input w/1100 psi output and What you should consider when buying the ninja shp regulator 4500 input w/1100 psi output and Where to Buy or Purchase the ninja shp regulator 4500 input w/1100 psi output. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 ninja shp regulator 4500 input w/1100 psi output of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja shp regulator 4500 input w/1100 psi output.

Conclusion

By our suggestions above, we hope that you can found ninja shp regulator 4500 input w/1100 psi output for you.Please don’t forget to share your experience by comment in this post. Thank you!