Best Indemand Hot Water Tank

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

FEATURES –

◆ Saves Energy and Money
The Thermoflow Elex 3.5 electric tankless water heater is adopt to advanced technology of Germany.Changing to this Elex 3.5 means there are no standby losses. No need to preheat before using, the hot water will come out from the heater instantly after you turn on the water heater,you only need to stop it immediately after using,no any waste for water or electricity.
◆ Unlimited Hot Water
Instant hot water thanks to rapid and maintenance-free bare wire heating systems.Because a Thermoflow heats water only when it is used, and for as long as it is needed, there is an endless supply of hot water. Nobody runs out of hot water .
◆ Space Saving
A Thermoflow Elex 3.5 tankless water heater completely replaces a conventional tank heater, yet takes up considerably less space, saving valuable living space and providing endless hot water on demand.
◆ Two Options for Applications
The Elex3.5 model can be used for two different applications:Act as primary heater, just connect the inlet with cold water directly, and connect the outlet with mix tap; Act as booster heater, just connect the inlet with the outlet of storage tank,and connect the outlet with mix tap, more fast heating, higher flow rate, saving your time.

USING TIPS –

• The device must be filled with water before connection to the electrical supply!
• Make sure the min pressure of your water supply system reaches 7.3 PSI.
• Please read the instruction manual carefully before you install or using the water heater !

PACKAGE INCLUDES –
1X Thermoflow 3.5kW electric tankless water heater
1X plastic bracket
1X bag of installation accessories (2 gaskets,2 anchors,2 screws)
1X instruction manual

Inquiry & aftersales service: [email protected]

Hotline:＋1（844）334-4203

Product Description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Enjoy easy access to hot water during your next outdoor adventure with the Coleman Hot Water on Demand H2Oasis Portable Water Heater. Ideal for washing dishes, bathing, or preparing hot beverages, this propane-powered water heater dispenses hot water at temperatures up to 125 degrees Fahrenheit. Simply fill the included 5-gallon water carrier with drinkable water, connect it to the pump, twist the dial to the desired temperature, and wait as the water heats up in as little as 30 seconds. The unit’s Instastart ignition allows you to light the heater with the push of a button, while PerfectFlow technology helps ensure a steady heat output. The H2Oasis also features a shower head to help you maintain personal hygiene while camping or backpacking. Equipped with a high-power submersible electric pump and brass hose fittings, the water heater maintains robust, reliable water flow even amidst harsh conditions. Its intuitive LED display provides a clear readout of heating status. And thanks to its mesh storage bag, this portable water heater is easy to carry around the campsite or trail.

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a tankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Conclusion

By our suggestions above, we hope that you can found indemand hot water tank for you.Please don’t forget to share your experience by comment in this post. Thank you!