Which Is The Best Furnace Heating Element Parts

They are heating element wire coils for use in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances. Made from heating alloy, they are high temperature resistant and corrosion resistant.

Warning:
1. Please stretch these heating element coils before connecting to power, or they would burn and cause damage.
2. They can not be cut into parts to use, or the power will increase, which is dangerous.

Specifications:
Material: FeCrAl  
Voltage: AC 220V
Power: 3000W
Outer Diameter: 7.1mm / 0.28″
Length: 792mm / 31.1″
Temperature: 500℃~600℃
Quantity: 1pc
Weight: 101g (approx.)

Package Included:
1 x Heating Element Coil

Note:
There may be 1-2mm error because of manual measurement. Thanks for your understanding.

This ignitor is the "narrow" style used by Goodman Manufacturing on many furnace models built under the Amana, Goodman, and Janitrol brands. The ceramic block on this ignitor is 1-1/4" wide, 1-3/16" deep, and 1/2" thick on the edge without the ridge. There is a locating ridge on the top right corner of the ceramic block when viewed from the wire end. The heating element portion of the ignitor is 2-1/4" long. a 90 degree mounting bracket is included that mounts to the ceramic block. If the original bracket is a snap-in fit the ignitor can be snapped into the original bracket if desired. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a plastic housing. This connection style was used on many Goodman, Amana, and Janitrol furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Goodman Amana Janitrol part numbers B1401015S and B1401018. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer's brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

Atwood 92249 Electric Water Heater Replacement Parts – 110 VAC Element/Gasket Kit. Atwood Mobile Products, LLC has been a world leader in designing, engineering and manufacturing appliances and hardware for the RV industry for over 30 years. Whether it’s our constant drive for innovation and improvement or our unwavering commitment to our customers it’s no coincidence that Atwood Mobile Products, LLC has found itself an integral part of the RV industry for now and many years to come.

This sequencer is a universal replacement for many electric furnace models. The M1 and M2 terminals come on first and close last to hold the blower in until the elements cool down. The bottom terminals are for the 24 volt control circuit connections. The low voltage terminals have jumper bars which may be removed with wire cutters if needed. This sequencer is commonly used in electric furnaces with four elements. S-20KW replaces Coleman York Evcon Luxaire 3120-3571, 3120A3571, S1-3120A3571, Goodman Amana Janitrol B12565-54, B1256554, 309564, Rheem Ruud Weatherking 42-19813-07, 42-19813-08, 42-21279-03, 42-21279-04, Carrier Bryant Payne HN62QC008, HN67QC008, HN67QC009, HN67QE005, HN67QG005, HN67QG006, P284-1310, P284-1311, and Emerson White Rodgers 24A34-6. This part is covered by the exclusive Protactor two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Protactor dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces. This part WILL NOT fit the -GEC and -GED “Drum” furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a “hot spot” and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

Product Description

Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel

From the Manufacturer

Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.

This sequencer is a universal replacement for many electric furnace models. The M1 and M2 terminals come on first and close last to hold the blower in until the elements cool down. The bottom terminals are for the 24 volt control circuit connections. This sequencer is commonly used in electric furnaces with two elements. S-10KW replaces Coleman Evcon York Luxaire 3110-3571, S1-3110-3571, 3400-3561, Goodman Amana Janitrol B12565-59, B1256559, B12565-52, B1256552, 30987, Rheem Ruud Weatherking PD425118, PD425078, 425018, 42-19813-04, 42-19813-09, Lennox Armstrong Ducane 309691, 22J5101, 72F83, 72F8301, 88W79, Carrier Bryant Payne HN67BA001, HN67BD002, HN67BD003, HN67KA277, HN67KA278, KN67KC277, HN67QA005, HN67QC005, P284-1213, P284-1308, P284-1309, and Emerson White Rodgers 24A34-3. This part is covered by the exclusive Protactor two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Protactor dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.

This ignitor is the "wide" style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block on this ignitor is 2" wide, 7/8" deep, and 5/8" thick. There are locating ridges on all four corners of the ceramic block. The heating element portion if the ignitor is 2-1/4" long. The lead wires are 5-1/4" long and are terminated with a plug that has two male pins inside a housing that has one square end and one pointed end. This connection style was used on many Carrier, Bryant, Payne, and Day & Night furnace models. Two high temperature ceramic wire nuts are also included and can be used if your existing plug is damaged or is not long enough. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.

Description:

They are heating element wire coils for use in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances. Made from heating alloy, they are high temperature resistant and corrosion resistant. There are 3 coils and each of them has good thermal efficiency and is safe to use.

Features:

Made from FeCrAl heating alloy, high temperature resistant, corrosion resistant.
Good thermal efficiency, even heating, safe use and long service life. Please stretch these heating element coils before connecting to power, or they would burn and cause damage. They can not be cut into parts to use, or the power will increase which is dangerous.
Used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances.

Specifications:

Material: FeCrAl 

Voltage: AC 220V

Power: 800W

Outer Diameter: 4.7mm / 0.18″

Length: 302mm / 11.89″

Quantity: 3pcs

Weight: 36g(approx.)

Package Includes:

3 x Heating Coils

Conclusion

By our suggestions above, we hope that you can found furnace heating element parts for you.Please don’t forget to share your experience by comment in this post. Thank you!