Which Is The Best 3M 4298 Adhesion Promoter Sponge Applicator

3M Adhesion Promoter 4298 is a liquid primer sponge packet used for most low surfaces energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc).

This sale is for Adhesion promoter for double sided Tape on Side Moldings and Emblems, 8 oz. can, SMT-AP Increase adhesion to the tape by 200%

Formulated specifically for use with 3M Acrylic Foam Tapes, our 3M Adhesion Promoter 06396 promotes a permanent bond with most low surface energy plastic materials commonly used in automotive instrument panel, interior trim and exterior trim parts. It works well with LSE plastics, as well as TPO, PPO, PP, PC, PC and ABS. The liquid primer dries in 30 to 90 seconds for fast and efficient application — once dry, it is ready to accept the attachment tape. The adhesion promoter is incorporated into an easy-to-use sponge inside a notched packet. Technicians simply tear open the top of the packet at the notches to expose the sponge and, using the bottom of the packet as an applicator, apply the fluid to the auto trim or part. Each sponge applicator packet contains .85 oz. (2.5 cc) of adhesion promoter, enough to cover up to 150 square inches. The adhesion promoter can also be cleaned from most surfaces using MEK or acetone solvents.

WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

For maximum bond strength, the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane or isopropyl alcohol.Carefully read and follow manufacturer’s precautions and directions for use when using cleaning solvents.

4 fl oz / 118 ml bottle of 3M Adhesion Promoter 4298 is a liquid primer used to increase the bond strength between acrylic adhesive tapes and most substrates. Increases the bond strength for most low to medium surface energy plastics. This would include common plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc). This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Automotive Adhesion Promoter, Sponge Applicator Packet 06396 2.5 cc/packet 3M(TM) Adhesion Promoter 06396 is a liquid primer used for enhancing adhesion of 3M(TM) Acrylic Foam Tapes for interior and exterior trim applications.

Adhesion Promoter PenAdhesion Promoter Pen
General: Automotive Adhesion Promoter Pen 4298 – Adhesive to use with installation of Dash Trim Kits to activate 3M.
It will last much longer than ‘Adhesion Promoter Pads’ and it will not dry out

Mounting bases are the perfect companion for cable ties. They allow a user to mount cable ties just about anywhere. Gb’s feature a 2-way fastening design where they mount either by the adhesive back, or a center screw for extra holding power. Cable ties can be inserted in 4 different directions which gives greater flexibility in mounting bundles.

Feature:
This adhesion promoter is supplied in an easy-to-use sponge applicator packet.
The liquid contents of the packet should be completely used as soon as possible after opening.
Apply promoter only to the areas that will be fully covered with tape.
The primer should be dry before applying tape.
For best results, apply tape immediately after primer application or no more than one hour after primer application.
Be sure the primed surfaces remains free from contaminants prior to tape application.
Increases bonding strength of any double sided tape.

Tips for using
1: Surface Preparation:
The bonding surface must be relatively clean and dry.
2: THIS IS NOT A GLUE AND CANNOT BE USED SOLELY AS A GLUE.
THE ADHESION PROMOTER IS FOR BETTER ADHESION OF YOUR TAPE.
YOU NEED TO APPLY IT ON A TAPE OR ANYTHING ADHESIVE.
3:Clean-up:
Contaminated surfaces should be cleaned
with a 50/50 Isopropyl Alcohol and water mixture.
Vigorous scrubbing may be required.

Application:
– Leave the primer 94 for a few minutes before applying tape.
This is usually accomplished in 5 minutes at normal temperature.
– Avoid any contacts with eyes and skin.
– This product is unsuitable for kids.

Type: Primer
Primer is compatible with plastic materials.
For use with acrylic.
Quantity:50 Pcs

Package include:
50 Pcs x Adhesion Promoters.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m 4298 adhesion promoter, sponge applicator, eg:

• What are Top 10 3m 4298 adhesion promoter, sponge applicator for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m 4298 adhesion promoter, sponge applicator to buy?
• What are Top Rated 3m 4298 adhesion promoter, sponge applicator to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 4298 adhesion promoter, sponge applicator?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 4298 adhesion promoter, sponge applicator.
• Before deciding to buy any 3m 4298 adhesion promoter, sponge applicator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m 4298 adhesion promoter, sponge applicator and What you should consider when buying the 3m 4298 adhesion promoter, sponge applicator and Where to Buy or Purchase the 3m 4298 adhesion promoter, sponge applicator. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m 4298 adhesion promoter, sponge applicator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 4298 adhesion promoter, sponge applicator.

Conclusion

By our suggestions above, we hope that you can found 3m 4298 adhesion promoter, sponge applicator for you.Please don’t forget to share your experience by comment in this post. Thank you!