kinsunny 
Nowadays, there are so many products of 12 volt flexible heating element in the market and you are wondering to choose a best one. You have searched for 12 volt flexible heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12 volt flexible heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Dernord 36V 1200W Stainless Steel Heating Element Immersion Heater Submersible Water Heater Element with 1 Inch NPT Fitting Double U Type
- 36v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
36V 1200W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 36v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:36volts
Wattage:1200 watts
Item Weight:11ounces
Product Diameter: 8mm
Tube length: 7.5 Inch
Screw Type:1”NPT
Color:White
DERNORD 24V 600W Submersible Water Heater Element with Double U Type Immersion Heater
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Easy to install for heater parts,Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:24volts
Wattage:600 watts
Item Weight:10.6ounces
Product Diameter: 8mm
Tube length: 175mm
Screw Type:1” NPT
Color:White
DERNORD 48V 1500W Submersible Water Heater Element Immersion Heating Element
- 48v heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
48V 1500W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 48v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:48 volts
Wattage:1500 watts
Item Weight:10.65 Ounces
Product Diameter: 8mm
Tube length: 7.5 Inch
Screw Type:1”NPT
Color:White
Icstation 12V 7W Flexible Polyimide Heater Plate Adhesive PI Heating Film 25mmx50mm (Pack of 4)
- Uses polyimide as insulator outside, and the thermo foil as electric heating element inside, formation through high temperature and high pressure heat sealing process
- Extremely thin, lightweight and flexible, polyimide heaters can quickly provide heat to where it is needed widely used in the electronics manufacturing,medical devices,scientific instruments
- Polyimide film has excellent dielectric strength, excellent resistance to electric intensity, perfect heat transfer efficiency, and great resistance stability, safe to use with stable performance
- Equipped with self adhesive can be fixed on the item surface easily, heating films can not control temperature itself.
- Working Voltage: DC 12V, Power: 7W, Film Size: 25 X 50mm/0.98 X 1.97inch(L*W), Maximum Temperature: about 150℃ Ship out by USPS with tracking information and 7-15 days delivery time usually
DERNORD 12V 150W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Flange
- 12v heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and CUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 150W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:150 watts
Item Weight:7.7 ounces
Product Diameter: 8mm
Tube length:175mm
Screw Type:1”NPT
Color:White
DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
ObboMed SH-4180 12V 45W Universal Compatible Flexible Retrofit Built-in Seat Heater Warmer for Front Seats Kit, Winter Car/Vehicle Accessory – Driver & Passenger Complete Set
- Retrofit Installation Kit for driver’s seat and front passenger’s seat. Suitable for seats with removable covers
- 4 Heating elements, ready-made cable set with relay and two universal switches
- Seat heating element size: 40 x 28 cm (LxW), Back rest heating element size: 30 x 28 cm (LxW)
- 2 heating levels, warming up 42°C to 55°C. Integrated temperature sensor, protect against overheating
- Connection to 12V vehicle voltage
New Nitrous Bottle Heater 12V 240W 4×12.5 Inch Flexible Heating Element 10/15LB
Icstation Heating Pad Electric Blanket Heater Flexible Silicone Rubber Mat Constant Temperature 12V 15W 50X100mm 200℃ Max
- Silicone heating pad uses silicone rubber as insulator outside, and the Ni-Cr alloy wire as electric heating element inside, which make it able to be in close contact with the object being heated.
- Icstation heater blanket is thin, lightweight and flexible. With excellent dielectric strength, fast heating and perfect heat transfer efficiency, the rubber heater pad can quickly provide heat to where it is needed.
- The silicone heater mat is convenient and safe to use for its service life is up to four years with thickness of 1.5~2mm and max withstand temperature of 200℃.
- The silicone rubber heater can be used for mixing and heat preservation (oil drum heater) in industrial equipment pipes, tanks, etc., and can be directly wrapped around the surface of the object to be heated when in use.
- Working Voltage: DC 12V, Power: 15W, Mat Size: 50 X 100mm/1.97 X 3.94inch (L*W) ❤We will free resend or refund without returning if our products have any problem. Please feel free to contact us to ask for discount if you are going to order a big deal.
Dracary Duty Fully Automatic Nitrous Bottle Heater Flexible Heating Element Fits 10LB,15LB,20LB (12volt)
- Silicone material ,Heating fast,easy installation
- Specifications:length:15 4/5inch width:6inch
- Thermostatically controlled to ensure optimum bottle temperature
- Fit for :10LB,15LB,20LB Applicable voltage:12volt
- Calibrated for specific pressure ranges, maximum horsepower and consistent nitrous flow for engine safety
- The heater does not include the relay switch nor the automatic heating sensor.【Please see our store other products】
Size Name:12volt
NEW 240 watt heater jacket for heating applications (Fuel/Oil filters, small nitrous bottles).
FEATURES: Nitrous Bottle Heater Element (40cm*15cm) 14AMPS with dual velcro staps Black in color.
THIS IS NEW BRAND 12 VDC 240WATT 13.8VDC 315WATT 16VDC 425WATT Best quality and good price for you !
Nitrous bottle heater,Nitrous bottle warmers
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found 12 volt flexible heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
