kinsunny 
Nowadays, there are so many products of 10 x 2.5 water filter housing in the market and you are wondering to choose a best one. You have searched for 10 x 2.5 water filter housing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 10 x 2.5 water filter housing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Pentek 158643 3/8" #10 3G Slim Line Clear Filter Housing with Bracket and Pressure Relief
- Slim filter housing for low-flow applications with space restrictions
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 2 psi at a flow rate of 5 gpm
This Pentek 158643 3/8″ #10 3G Slim Line clear filter housing with integrated mounting bracket and pressure relief is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/8″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 2 pounds per square inch (psi) at a flow rate of 5 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 5 gpm | 2 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 13-3/8 x 5-3/8 inches (340 x 137 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Similar items with 4 stars and above
Geekpure 10-Inch Standard Slim Line Blue Filter Housing for 2.5" x 10" Filter -3/4" Brass Female NPT Inlet/Outlet with Pressure Relief Wrench and Bracket
- COMPLETE-Complete 1 set 10 inch blue housing,3/4 inch brass ports with pressure relief button for high pressure,with plastic wrench and bracket.
- STANDARD-Fits all standard sized 2.5 inch x 10 inch filters housing only, filter cartridges are sold separately.
- APPLICATIONS-Used for whole house, reverse osmosis water filtration system.
- WARRANTY-Fits NSF standard.One year limited warranty.
- RESPONSABLE MANUFACTURER- ISO9001:2008 certificated Manufacturer ,also Member of Water Quality Association (WQA),30 Days Money Back Guarantee.
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers
- Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
- Fit with most RO systems using standard 10″ filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- INLET-OUTLET-1/4″ female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ .
- SIMPLE INSTALLATION-Easy to replace.Food grade Polyethylene will not cause pollution to water.
- Pack of 3. 1 x Filter housing , 2 x O rings . matched wrench ASIN: B07D9JWRYQ .
SimPure Carbon Water Filter，5 Micron 10" x 2.5" Carbon Block Filter Cartridge Replacement，Whole House CTO Carbon Sediment Water Purifier Filter Compatible with Most RO System, 4 Pack
- HIGH QUALITY MATERIALS: SimPure activated carbon filter is made of high quality coconut shell carbon. Outer layer has food grade plastic net wrapping PP non-woven fabric, which can last up to six months.
- FOOD GRADE EFFICIENCY FILTRATION: Designed with 10” x 2.5” slim carbon block filter, filtration rating is 5 micron, filters up to 15,000 gallons, effectively removes 97% sediment, chlorine, organic chemicals and odor, etc.
- EASY INSTALLATION: Universal 10 inch Cartridge, fits most standard under-sink RO system, whole house 10” standard filter housing and any 10” water filtration unit. Drop-in designed for easy and quick filter change, no tools required.
- 100% SAFE: Our replacement water filter cartridge is verified by independent laboratory tests, compliance with NSF 42 certification standards to ensure your safe. Durable and sealed end caps with sealed silicon O-ring prevent leak. Provide quite clean and fresh water for your family.
- EXCELLENT CUSTOMER SERVICE: We provide one year warranty and 30 days money back, lifetime friendly customer service, if you have any questions, do not hesitate to contact us, we will always to stand help you.
Similar items with 4 stars and above
Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief
- Standard filter housing for residential, commercial, and industrial applications
- Clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition
- Holds a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately)
- Pressure relief button for easier cartridge replacement
- Initial pressure drop of 1 psi at a flow rate of 10 gpm
This Pentek 150071 3/4″ #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for strength and resistance to chemicals. The cap has 3/4″ female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10″ x 2-1/2″ sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.
Specifications
| Filter cartridge size (H x W) (sold separately) | 10 x 2-1/2 inches (254 x 63.5 mm) |
| Initial pressure drop at 10 gpm | 1 psi |
| Maximum temperature | 125 degrees F (51.7 degrees C) |
| Maximum pressure | 125 psi |
| Maximum dimensions (H x W) | 12-5/8 x 5-1/4 inches (321 x 133 mm) |
| Materials and structural integrity certification | NSF/ANSI standard 42 |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Geekpure Filter Housing 10" for Reverse Osmosis System -1/4 Inch Inlet/Outlet-for 2.5 Inch x 10 Inch Fitlers Clear Housing
- FUNCTION-Replacement housing for RO system,Widely used in RO system or pre-filtration.Clear housing allows you to see when you need to change filters and everything else works as it should.
- UNIVERSAL-Standard size for most RO systems using standard 10″ filters.
- INLET-OUTLET-1/4″ female threaded in and out fittings. NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
- SIMPLE INSTALLATION-Easy to replace.Food grade AS will not cause pollution to water.
- Just Housing in the box, matched wrench ASIN: B07D9JWRYQ ,matched quick fitting ASIN:B078VQN6TZ .
Membrane Solutions 25 Micron Sediment Water Filter Replacement Polypropylene Cartridge 10"x 2.5" for Whole House RO System, Compatible with Aqua-Pure AP110, GE FXUSC,WHKF-GD05,Culligan P5-6 Pack
- STANDARD DIMENSION – 10 inches x 2.5 inches 25 micron polypropylene sediment filter cartridge. Compatible with a wide rage of industrial filter housings and the whole house filter housings – 6 Pack.
- FUNCTION – Remove 99% rust, silt, sand, iron and other undissolved particles in dirty water. As the first line of defense in the filtration system, protect your water using appliances and plumbing for cleaner water, improve water quality.
- NSF CERTIFICATION – Compare to string wound filter, this filter using unique hot melt technology, no fibers falling, avoid second pollution to liquid.
- LIFETIME – For better water quality, recommended replace TWO or THREE times a year, depending on the quality of the original water source and application type. Recommended change out differential pressure is 30psi(2.1bar).
- MULTI-LAYER STRUCTURE – Three separate gradient density layers enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter.
10 inch Transparent Standard Water Filter Housing, Presser Relief Button, 3/4” Inlet/Outlet Brass Port, Accepts Standard 10”x 2.5” Cartridges, 3/4” Brass Port, Mounting Hardware Included (2 Sets)
- ???? DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed
- ????ACCEPTS 10” Standard Cartridges: Dupont PFC5002, WFPFC5002, Pentek DGD Series, 3M CFS110, CBC-10, Aqua Pure AP110, AP51T, Hydronix SGC-25-1005, Culligan P5, D-10A, OmniFilter RS14-SD, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, WHA2BF5, American Plumber W5P, Watts Premier MAXETW-975, WCBCS975-RV, SCWH-5, Tier1 EP5_10, EcoPure EPW2C, Purenex C-5M, KleenWater KWGE25RG, Omnipure OMB934-5M, WFPFC9001, MatriKX E32-250-125-975, DEV9108-15, iSpring FC15 (Sold Separately)
- ???? WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2
Similar items with 4 stars and above
Tier1 Replacement for Omnifilter, GE, Pentek CBC-10 CB3 FXUVC FXULC 0.5 Micron 10 x 2.5 Radial Flow Carbon Water Filter
- QUICK & EASY INSTALLATION: Fits most housings that accept standard 10-inch x 2.5-inch water filter cartridges.
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months, depending on your water quality, you keep your water tasting great with the Tier1 CB3 filter.
- HIGH QUALITY FILTRATION: This Culligan D30 comparable Tier1 filter reduces chlorine and odor, cysts, dirt, sediment, sand, silt, rust and corrosion, and other particles.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is universal to many 0.5 Micron 10 x 2.5 carbon water filters. Replace your old Pentek CBC-10 water filter or Omnifilter CB3 Filter with a Tier1 FXUVC filter.
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
10" Big Blue Housing Whole House Water Filtration System 1" Inlet/Outlet Brass Ports Pressure Relief Button, Meets NSF Standards & Regulations COMPATIBLE to BB-20B, 150233, 150235 (1 Set, Transparent)
- ???? DURABLE STRUCTURE: 10” Transparent Big Blue Housing Set is proper for high-flow and heavy sediment applications. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.
- ???? POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Removing Chlorine, Taste, Odors & Other Particles
- ???? EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
- ????ACCEPTS 10”x 4.5” Big Blue Water Filter Cartridges as: Ronaqua, 3M 70020162437, DuPont WFHDC8001, Watts MAXETW-FF975, KX Technologies 32-425-125-975, ClearChoice 84629, Liquatec CB-450-975-05, SDF-45-1005, MATRIKX-CTO2-HD10, Pelican CB-BB-10, EP-BB, EPM, CCBC & CEP Series, Fette Filter COMIN18JU061077, Pentek 155548-43, DGD-5005, Trojan CB-BB-10, WCBFF975, American Plumber WDGD-5005, Aqua-Pure AP810, AP814 and AP811, Hydronix SDC-45-1005, Pentair DGD-5005, 9108-44, DEV9108-44 (Sold Separately)
- ???? WELL-MATCHED MODELS OF HOUSINGS: Pentek 150237, 150469, 153029 #10, BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Hydronix HX-HF45-10CLBK10 and HF45-10BLBK15, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found 10 x 2.5 water filter housing for you.Please don’t forget to share your experience by comment in this post. Thank you!
